Home / ASMPT SMT Machines / SIPLACE SX
Model reference · Confirm the exact offered configuration
OverviewSIPLACE SX SMT Placement Platform
SIPLACE SX is a modular high-mix placement platform. ASMPT lists SX1 at 43,250 cph and SX2 at 86,500 cph, while describing removable gantries for capacity changes. Choose the required capacity from your component mix and line balance, then verify the heads and gantries on the actual unit.
Manufacturer-published model data
SIPLACE SX Technical Specifications
| SX1 / SX2 published placement speed | 43,250 / 86,500 components per hour under ASMPT's stated conditions; neither figure promises actual line output. |
|---|---|
| Board envelope | Up to 450 × 560 mm with single-track transport, 450 × 265 mm in dual-track mode; the long-board option is listed up to 1,525 × 560 mm. |
| Feeder capacity | Up to 120 positions for 8 mm tape feeders; verify the offered changeover and feeder package. |
| Head and gantry options | ASMPT describes interchangeable gantries and CP20, CPP, TWIN and SOLO head applications; installed hardware determines component range. |
Important: model-level figures and features are conditional manufacturer information, not guarantees for a particular used SIPLACE SX unit.
Key Features
Configuration Must Be Verified
The actual SIPLACE SX quote should identify the exact SX variant, installed gantries, heads, feeders, conveyors, software, voltage and visible condition.
Buyer decision guide
When SIPLACE SX Makes Sense — and When It May Not
SIPLACE SX selection should begin with production requirements and evidence, not with a model name alone.
Typical Applications
Typical Applications for SIPLACE SX
SIPLACE SX should be evaluated against the buyer’s board envelope, component mix, installed heads, feeder supply and line balance. The final application fit depends on the evidence for the specific unit.
Before quotation
Three SIPLACE SX Buyer Questions
These questions keep the quotation scope connected to the buyer’s real SMT process.
1
Is the quotation for SX1 or SX2, and which gantries and heads are installed?
SIPLACE SX buyers should confirm this with actual-machine evidence before quotation.
2
Do the largest boards require single-track or the optional long-board transport?
SIPLACE SX buyers should confirm this with actual-machine evidence before quotation.
3
Which feeders, software licences and changeover hardware are included?
SIPLACE SX buyers should confirm this with actual-machine evidence before quotation.
Used-machine inspection
Inspection and Export Preparation for an Actual SIPLACE SX
- Nameplate and configurationModel, serial, year, voltage and installed options.
- Machine configurationMechanical, transport, sensing, camera, software and motion condition relevant to the quoted SIPLACE SX.
- Transport and softwareConveyor, sensors, program and line-interface evidence where applicable.
- Running and packing proofPower-on evidence, visible operation and export packing records.
Spare Parts
SIPLACE SX Spare Parts Scope
Request a unit-specific SIPLACE SX list for placement heads, compatible feeders, nozzles, vision parts and maintenance items. Availability is confirmed only in a quotation.
Quotation checklist
Provide PCB dimensions, component mix, target line rate, required heads and feeders, voltage and destination, required accessories and desired inspection evidence for the proposed SIPLACE SX.
FAQ
Common questions for overseas buyers evaluating a SIPLACE SX.
01Variant
Does an SX1 automatically perform like an SX2?
No. ASMPT publishes different platform speeds. Confirm the exact model and installed gantries.
02Feeding
Are 120 feeders included in every used machine?
No. That is a published maximum for 8 mm positions; the actual feeder inventory must be listed separately.
03Application
Can every SX place large processor BGAs?
No. ASMPT describes a SOLO head option for that work. Verify its installation and application setup.
Send Your SIPLACE SX Production Requirement
Share PCB dimensions, component mix, target line rate, required heads and feeders, voltage and destination and inspection expectations. LCSMT can review whether an actual SIPLACE SX configuration is a practical match.
Manufacturer source
Read the original ASMPT SMT Solutions model information. Published specifications are configuration-dependent; verify the exact machine before quotation.