Home / SMT printers / DEK Galaxy
Model reference · Confirm the exact offered configuration
OverviewDEK Galaxy Advanced Packaging Stencil Printer
DEK Galaxy addresses wafer bumping, substrate printing and SMT pre-assembly. The manufacturer lists 7 seconds as a core cycle and separately states alignment and wet-print capability. Select the process and substrate first, then verify the tooling and software fitted to the offered unit.
Manufacturer-published model data
DEK Galaxy Technical Specifications
| Maximum print area | 600 × 508.5 mm in ASMPT's model table. |
|---|---|
| Substrate envelope | 50 × 40.5 mm minimum; 620 × 508.5 mm maximum, subject to tooling. |
| Wet-print capability | Greater than 2.0 cpk at ±17.5 µm; this is distinct from the ±12.5 µm machine-alignment figure. |
| Core cycle | 7 seconds in the manufacturer table, not a guaranteed finished-substrate rate. |
Important: model-level figures and features are conditional manufacturer information, not guarantees for a particular used DEK Galaxy unit.
Key Features
Configuration Must Be Verified
The actual DEK Galaxy quote should identify the exact Galaxy configuration, wafer fixtures, support tooling, cleaning, software and visible condition.
Buyer decision guide
When DEK Galaxy Makes Sense — and When It May Not
DEK Galaxy selection should begin with production requirements and evidence, not with a model name alone.
Typical Applications
Typical Applications for DEK Galaxy
DEK Galaxy should be evaluated against the buyer’s wafer or substrate type, print area, required wet-print result and tooling. The final application fit depends on the evidence for the specific unit.
Before quotation
Three DEK Galaxy Buyer Questions
These questions keep the quotation scope connected to the buyer’s real SMT process.
1
Is the material a wafer, singulated substrate or PCB, and what are its dimensions?
DEK Galaxy buyers should confirm this with actual-machine evidence before quotation.
2
Which singulated tooling, support and cleaning options are installed?
DEK Galaxy buyers should confirm this with actual-machine evidence before quotation.
3
Can the offered unit demonstrate the required wet-print result with representative material?
DEK Galaxy buyers should confirm this with actual-machine evidence before quotation.
Used-machine inspection
Inspection and Export Preparation for an Actual DEK Galaxy
- Nameplate and configurationModel, serial, year, voltage and installed options.
- Machine configurationMechanical, transport, sensing, camera, software and motion condition relevant to the quoted DEK Galaxy.
- Transport and softwareConveyor, sensors, program and line-interface evidence where applicable.
- Running and packing proofPower-on evidence, visible operation and export packing records.
Spare Parts
DEK Galaxy Spare Parts Scope
Request a unit-specific DEK Galaxy list for squeegees, support tooling, cleaning items and process-specific fixtures. Availability is confirmed only in a quotation.
Quotation checklist
Provide substrate drawing, stencil and paste details, print criteria, tooling scope, voltage and destination, required accessories and desired inspection evidence for the proposed DEK Galaxy.
FAQ
Common questions for overseas buyers evaluating a DEK Galaxy.
01Accuracy
Is ±12.5 µm the wet-print specification?
No. ASMPT lists ±12.5 µm for alignment and ±17.5 µm for wet printing at different conditions.
02Tooling
Are all advanced-packaging fixtures included?
No. Request an itemized installed-tooling list.
03Cycle
Does a 7-second core cycle guarantee 7-second line takt?
No. Transfer, cleaning and inspection affect the sequence.
Send Your DEK Galaxy Production Requirement
Share substrate drawing, stencil and paste details, print criteria, tooling scope, voltage and destination and inspection expectations. LCSMT can review whether an actual DEK Galaxy configuration is a practical match.
Manufacturer source
Read the original ASMPT SMT Solutions model information. Published specifications are configuration-dependent; verify the exact machine before quotation.