Model reference · Confirm the exact offered configuration

Overview

DEK NeoHorizon SMT Stencil Printer Platform

Request Unit Review WhatsApp Buyer Guide

NeoHorizon 03iX and 01iX share a printer family but differ in published wet-print capability, core cycle and stencil loading. The 01iX is listed with automatic stencil loading; the 03iX is semi-automatic. Select by the process tolerance, changeover frequency and the options actually installed on the offered unit.

Official source recordedUnit evidence requiredInspection guideExport support

Manufacturer-published model data

DEK NeoHorizon Technical Specifications

03iX / 01iX wet-print capability	Greater than 2.0 cpk at ±25 / ±20 µm respectively, per ASMPT's model table; process conditions must be checked.
03iX / 01iX core cycle	8 / 6.5 seconds respectively in the manufacturer table; this is not a finished-board throughput promise.
Stencil loading	03iX semi-automatic; 01iX automatic with squeegee drip catcher in the listed configuration.
Maximum print area	510 × 508.5 mm; maximum listed substrate size is 620 × 508.5 mm.

Important: model-level figures and features are conditional manufacturer information, not guarantees for a particular used DEK NeoHorizon unit.

Key Features Reference configuration illustration for DEK NeoHorizon

Configuration Must Be Verified

The actual DEK NeoHorizon quote should identify the exact NeoHorizon variant, stencil loader, cleaning, support, software, voltage and visible condition.

Buyer decision guide

When DEK NeoHorizon Makes Sense — and When It May Not

DEK NeoHorizon selection should begin with production requirements and evidence, not with a model name alone.

Tighter printing requirementCompare the published 01iX wet-print figure with the actual stencil, paste and substrate; verify on a representative print trial.

Frequent changeoversCheck whether automatic stencil loading on 01iX would remove a real setup bottleneck and whether the quoted unit includes it.

Board supportRecord clamping, support and underside-cleaning equipment, as these change the practical printing process.

SPI feedbackASMPT describes closed-loop options; confirm both printer software and compatible SPI interface before relying on feedback.

Typical Applications

Typical Applications for DEK NeoHorizon

DEK NeoHorizon should be evaluated against the buyer’s print tolerance, stencil changes, board support, cleaning and SPI integration. The final application fit depends on the evidence for the specific unit.

Before quotation

Three DEK NeoHorizon Buyer Questions

These questions keep the quotation scope connected to the buyer’s real SMT process.

Is the quoted printer a 03iX or 01iX, and how is stencil loading equipped?

DEK NeoHorizon buyers should confirm this with actual-machine evidence before quotation.

What PCB, stencil and paste combination sets the required print capability?

DEK NeoHorizon buyers should confirm this with actual-machine evidence before quotation.

Which cleaning, support and SPI-linked options can be demonstrated on the actual unit?

DEK NeoHorizon buyers should confirm this with actual-machine evidence before quotation.

Used-machine inspection

Inspection and Export Preparation for an Actual DEK NeoHorizon

Nameplate and configurationModel, serial, year, voltage and installed options.
Machine configurationMechanical, transport, sensing, camera, software and motion condition relevant to the quoted DEK NeoHorizon.
Transport and softwareConveyor, sensors, program and line-interface evidence where applicable.
Running and packing proofPower-on evidence, visible operation and export packing records.

Spare Parts

DEK NeoHorizon Spare Parts Scope

Request a unit-specific DEK NeoHorizon list for squeegees, cleaning media, support tooling, clamps, sensors and service consumables. Availability is confirmed only in a quotation.

Quotation checklist

Provide PCB and stencil dimensions, paste and tolerance needs, cleaning and SPI options, voltage and destination, required accessories and desired inspection evidence for the proposed DEK NeoHorizon.

FAQ

Common questions for overseas buyers evaluating a DEK NeoHorizon.

01Variant

Does 03iX have the same published wet-print capability as 01iX?

No. ASMPT lists ±25 µm for 03iX and ±20 µm for 01iX at the stated cpk condition.

02Cycle

Will every board leave in 6.5 seconds?

No. The number is a core-cycle specification; setup, cleaning, transport and inspection affect line output.

03Integration

Is closed-loop SPI standard on all units?

The manufacturer describes it as a connection option. Verify installed software and interface.

Send Your DEK NeoHorizon Production Requirement

Share PCB and stencil dimensions, paste and tolerance needs, cleaning and SPI options, voltage and destination and inspection expectations. LCSMT can review whether an actual DEK NeoHorizon configuration is a practical match.

Request Unit Review WhatsApp

Manufacturer source

Read the original ASMPT SMT Solutions model information. Published specifications are configuration-dependent; verify the exact machine before quotation.