Home / DESEN SMT Machines / DSL-850
Model reference · Confirm the exact offered configuration
OverviewDSL-850 Large-Format Stencil Printer
DESEN DSL-850 is a large-format solder-paste printer with a published maximum substrate of 850 × 610 mm. Large-panel selection must also account for support, stencil clearance, warpage and transfer into the next machine; the printer envelope alone does not define a compatible line.
Manufacturer-published model data
DSL-850 Technical Specifications
| Maximum substrate | DESEN publishes 850 mm in X × 610 mm in Y. |
|---|---|
| Setup features | The manufacturer describes automatic board-thickness platform adjustment and automatic stencil positioning. |
| Paste and illumination | The product page lists automatic paste recovery and light-source adjustment. |
| Print adjustment | DESEN lists automatic print-angle compensation; installed options and achieved process results require verification. |
Important: model-level figures and features are conditional manufacturer information, not guarantees for a particular used DSL-850 unit.
Key Features
Configuration Must Be Verified
The actual DSL-850 quote should identify the installed heads, feeders, nozzles, software, voltage, accessories and visible condition.
Buyer decision guide
When DSL-850 Makes Sense — and When It May Not
DSL-850 selection should begin with production requirements and evidence, not with a model name alone.
Before quotation
Three DSL-850 Buyer Questions
These questions keep the quotation scope connected to the buyer’s real SMT process.
1
What are the actual panel, carrier and stencil dimensions?
DSL-850 buyers should confirm this with actual-machine evidence before quotation.
2
Which support and thickness-adjustment tooling is installed?
DSL-850 buyers should confirm this with actual-machine evidence before quotation.
3
Can the full panel transfer, align, print and clean without unsupported regions or collisions?
DSL-850 buyers should confirm this with actual-machine evidence before quotation.
Running video confirmation
DSL-850 Running Video Review
Before shipment, review the relevant power-on, movement, operating state and visible condition for the specific offered unit.
Request a recording of the specific offered machine, including the operating sequence relevant to your application.
- Power-on and visible operating-state confirmation
- Relevant transport, motion or inspection sequence
- Unit-specific condition evidence before export packing
Request an operating demonstrationConfirm the exact configuration and running condition before ordering.
FAQ
Common questions for overseas buyers evaluating a DSL-850.
01Size
What maximum substrate does DESEN publish for DSL-850?
850 × 610 mm. Confirm usable tooling and process clearance for the actual panel.
02Line fit
Does an 850 mm printer make an entire line large-board compatible?
No. Check every transfer and downstream process against the same panel drawing.
Send Your DSL-850 Production Requirement
Share PCB size, component range, required throughput, feeder strategy, voltage, destination and inspection expectations. LCSMT can review whether an actual DSL-850 configuration is a practical match.