Place this family at the end of a line where the inspection result needs a storage decision. The catalogue describes collecting accepted boards and retaining NG boards for disposition. Specify how the line should react when a board result is missing or the destination is unavailable.
Model referencesConfiguration checksBuyer's acceptance checksRequest evidence
Guowei GW-ULF / GW-ULFH Technical Specifications
Key Features
Application
Post-AOI sorting and unloading according to the catalogue
Transfer reference
900 ± 20 mm or specified. Minimum board thickness listed as 0.6 mm.
Conveyor and electrical reference
Round belt. Single-phase 100–230 V AC as specified, up to 100 VA.
2024 catalogue configurations
Model
PCB range L × W (mm)
Envelope L × W × H (mm)
Magazine (mm)
Weight
GW-ULF250
(60 × 60) to (350 × 250)
1200 × 1150 × 1200
355 × 320×563
100kg
GW-ULF330
(60 × 60) to (455 × 330)
1300 × 1420 × 1200
460×400×563
130kg
GW-ULF390
(60 × 60) to (530 × 390)
1500 × 1530 × 1200
535×460×570
150kg
GW-ULF460
(60 × 60) to (530 × 460)
1500 × 1630 × 1200
535×530×570
180kg
GW-ULFH250
(60 × 60) to (350 × 250)
1690 × 1450 × 1200
535×530 × 570
180kg
Guowei 2024 catalogue, PDF page 15. Manufacturer reference. Confirm the supplied configuration on the quotation.
Typical Applications and Selection
A sorting unloader suits a line that needs an explicit stored-board outcome after inspection. A simple conveyor hold can serve a line that only needs an operator to pause and examine an occasional suspect board. Choose using storage volume and the recovery process.
Acceptance Trial
Trial both board outcomes and a destination-full case. Watch the physical placement and the result shown on the interface. Clear the alarm with the line paused and check that the next board retains the correct classification.
Machine Images from Different Angles
Follow the result and board destination together
Provide the upstream machine, interface and result states. Ask the supplier to draw separate paths for accepted boards, rejected boards and cases with an undefined result. Confirm whether the operator can access quarantined boards without disturbing accepted ones.
Opposite side showing the main enclosure and shorter transfer cabinet
Compare the catalogue geometry
The 2024 catalogue shows the pcb sorting unloader family on PDF page 15. Compare the enclosure, operator access and transfer interfaces with the supplied views. For model-specific dimensions, use the applicable configuration table and verify the offered machine.
Guowei catalogue family reference, PDF page 15
Running Video and Test Evidence
Trial both board outcomes and a destination-full case. Watch the physical placement and the result shown on the interface. Clear the alarm with the line paused and check that the next board retains the correct classification.
Check magazine insertion, stops and travel at the selected pitches. Have the supplier confirm which sensors, belts and guide parts match the quoted suffix.
Quotation checklist
Include the following when asking for a configuration and acceptance plan.
Upstream AOI states and destinations for OK, NG and unknown results
Magazine type, board thickness, rail arrangement and storage demand
Destination-full response and safe recovery test
FAQ
Common questions when selecting Guowei GW-ULF / GW-ULFH PCB Sorting Unloader for your line.
01Buying question
How should a ULFH configuration be identified?
Confirm lane arrangement, rail geometry and the magazine drawn for the actual unit. The catalogue alone does not bind the pictured cabinet to this suffix.
02Buying question
Can it work without an AOI result?
Ask which supported modes operate without an inspection message. Agree a safe destination for unclassified boards.
03Buying question
How is board thickness checked?
Test the minimum thickness in your PCB mix on the specified carriers, belts and magazine pitch before accepting the line.
Agree the packed dimensions, handling points and protection for exposed interfaces before arranging freight. Ask for the packing list with loose tools and accessories identified so they can be checked at receiving.
Send Your Guowei GW-ULF / GW-ULFH Production Requirement
Share the application, dimensions and acceptance requirements. Ask for the fitted configuration, utility drawing and delivery scope.