Home / BGA Rework Systems / PACE ST925
Manufacturer-reference buyer guide
OverviewPACE ST925 Convective and Infrared SMT Rework System
The current ST925 combines a programmable hot-air handpiece, infrared board preheat and a Z-axis stand. PACE has revised this bundle over time: the current ST1600 preheater replaced the earlier PH-100. Check which components are actually fitted to any offered unit before developing a thermal process.
Manufacturer-published model data
PACE ST925 Technical Specifications
| Current bundle | PACE lists ST325 programmable hot-air station, ST1600 infrared preheater and ST500A Z-axis platform in the current ST925. |
|---|---|
| Top heating | Published 575 W convective/hot-air top heater. |
| Bottom preheat | ST1600 provides four independently controlled 400 W IR heaters, totaling 1,600 W. |
| Board support | Current ST1600 includes a 305 × 406 mm integrated PCB holder in PACE's product data. |
| Process programming | ST325 manual and timed modes; PACE lists up to 20 time/temperature profiles. Confirm the controller and software on the offered set. |
Manufacturer model data · Important: model-level figures and features are conditional manufacturer information, not guarantees for a particular used PACE ST925 unit.
Key Features
Configuration Must Be Verified
The actual PACE ST925 quote should identify the ST325 handpiece, ST1600 or earlier preheater, ST500A stand, board holder, nozzles, controller, voltage and visible condition.
Buyer decision guide
When PACE ST925 Makes Sense — and When It May Not
PACE ST925 selection should begin with production requirements and evidence, not with a model name alone.
Typical Applications
Typical Applications for PACE ST925
PACE ST925 should be evaluated against the buyer’s board and package dimensions, nozzle selection, preheat, profile records and acceptance criteria. The final application fit depends on the evidence for the specific unit.
Before quotation
Three PACE ST925 Buyer Questions
These questions keep the quotation scope connected to the buyer’s real SMT process.
1
Which board, component and nozzle size will be reworked?
PACE ST925 buyers should confirm this with actual-machine evidence before quotation.
2
Does the offered ST925 include the current ST1600 or an earlier PH-100, and which holder/nozzles are included?
PACE ST925 buyers should confirm this with actual-machine evidence before quotation.
3
Can the actual system repeat removal and installation with logged profile and inspection evidence?
PACE ST925 buyers should confirm this with actual-machine evidence before quotation.
Running video confirmation
PACE ST925 Running Video Review
Before shipment, review the relevant power-on, movement, operating state and visible condition for the specific offered unit.
This review page does not present a reference clip as proof of the actual machine. A reviewed unit-specific recording is required before it can be attached here.
- Power-on and visible operating-state confirmation
- hot-air flow, preheat, Z-axis motion, profile setting and sample-board result
- Unit-specific condition evidence before export packing
Running video pendingA reviewed local video is not yet attached. Open this panel for unit-specific proof.
Used-machine inspection
Inspection and Export Preparation for an Actual PACE ST925
- Nameplate and configurationModel, serial, year, voltage and installed options.
- Machine configurationMechanical, transport, sensing, camera, software and motion condition relevant to the quoted PACE ST925.
- Transport and softwareConveyor, sensors, program and line-interface evidence where applicable.
- Running and packing proofPower-on evidence, visible operation and export packing records.
Spare Parts
PACE ST925 Spare Parts Scope
Request a unit-specific PACE ST925 list for heaters, nozzle kit, handpiece, board support, sensors and maintenance items. Availability is not claimed on this review page.
Quotation checklist
Provide board/package size, bundle generation, nozzle and holder kit, voltage and destination, required accessories and desired inspection evidence for the proposed PACE ST925.
FAQ
Common questions for overseas buyers evaluating a PACE ST925.
01Bundle
What is in the current ST925?
PACE currently lists ST325, ST1600 and ST500A; older literature may show PH-100.
02Optics
Does ST925 include TF-style optical BGA alignment?
The cited ST925 description does not establish that; verify any separate alignment setup.
03Profiles
Are twenty saved profiles proof of process quality?
No. They allow repeatable settings, but actual thermal and solder-joint outcomes need measurement.
Export packing proof
Export Packing and Container Loading
The V3 scrolling proof gallery is retained. It describes LCSMT export preparation, not the condition of a particular PACE ST925 unit.
Send Your PACE ST925 Production Requirement
Share board/package size, bundle generation, nozzle and holder kit, voltage and destination and inspection expectations. LCSMT can review whether an actual PACE ST925 configuration is a practical match.