JUKI / SMT spare parts
JUKI FX-1R servo drive reference
The supplier pairs JUKI reference 40026786 with MR-J2S-200B-S009V613. Keep both identifiers and the required parameter handover before comparing a drive replacement.
Selected part reference
40026786 / MR-J2S-200B-S009V613
Confirm the offered item's maker, part code, condition, availability and machine fit before ordering.
40026786 / MR-J2S-200B-S009V613
- Model
- 40026786 / MR-J2S-200B-S009V613
- Part code
- 40026786 / MR-J2S-200B-S009V613
- Fit
- Confirm by unit
01 / Select precisely
Part details
Check the complete part number and the details needed to match your machine.
| Model | Part number | Compatibility | Details and checks |
|---|---|---|---|
| 40026786 / MR-J2S-200B-S009V613 | 40026786 / MR-J2S-200B-S009V613 | Catalogue reference. Exact offered assembly, machine interface and revision require confirmation. |
|
Application and identification
Use and ordering context
The retained listing pairs a machine purchasing reference with an amplifier designation. These are separate identity fields: the pairing is a supplier claim, not a manufacturer-approved cross-reference. The small reference photograph cannot resolve every character on the actual nameplate. Preserve the complete MR-J2S-200B-S009V613 text and obtain offered-item evidence before an engineer assesses the replacement.
02 / Check before ordering
Match the installed part
Check the installed code and machine configuration. Similar appearance or a shared series name does not establish interchangeability.
- Retain the installed JUKI purchasing code and the complete amplifier nameplate as two separate fields.
- Request the offered model, full suffix and connection evidence; do not assume an A-series and a B-series amplifier are interchangeable.
- Identify responsibility for the applicable parameter record and the machine-specific acceptance decision before agreeing a supply or repair scope.
03 / Make a useful decision
Selection and replacement advice
Compare an exact requested assembly, a differently marked amplifier and a repair of the installed unit as distinct proposals. Matching the MR-J2S prefix alone leaves the interface, customised designation and machine configuration unresolved. Ask who will retain and restore the required settings and who will accept the result under the applicable machine procedure. A general amplifier manual does not approve a standard unit in place of this supplier-listed JUKI reference.
04 / Care and handling
Maintenance and handling guidance
Keep the existing alarm, settings record and axis identification available to the authorised service team before an amplifier is removed.
Use the exact equipment instructions and qualified personnel for any electrical or configuration work; this page provides no wiring or energisation procedure.
Record what a seller actually checked, separately from any later installed-machine assessment.
Before you ask
Questions about this part
Does 40026786 prove the maker designation?
It is paired with MR-J2S-200B-S009V613 by the supplier. Confirm that relationship against the installed assembly and applicable documentation.
Can the custom suffix be omitted?
No omission or equivalence is approved here. Its significance must be resolved for the actual machine.
Does a bench-test statement prove installed operation?
No. Obtain its method and scope, then retain the separate application and machine-acceptance requirements.
Keep the part in context
Request a quote for this part
Choose the complete part number and quantity. Continue to our contact form with these details; your inquiry is sent only when you submit that form.