JUKI / SMT spare parts
JUKI 40000727 Y-axis motor
Keep the JUKI ordering reference and the source-listed motor identifier together when evaluating a KE2050 or KE2060 replacement.
Selected part reference
40000727 / TS4616N1020E200
Source-listed reference. Exact fit, condition and availability require confirmation.
Source-listed Y-axis motor
- Model
- Source-listed Y-axis motor
- Part code
- 40000727 / TS4616N1020E200
- Fit
- Confirm by unit
Photographs are bound to the selected part number. Reference images do not establish current inventory or interchangeability.
01 / Select precisely
Compare the family variants
Compare the complete part numbers, revisions and documented specifications. Similar appearance does not establish interchangeability.
| Variant | Part number | Compatibility | Specifications |
|---|---|---|---|
| Source-listed Y-axis motor | 40000727 / TS4616N1020E200 | Supplier-described KE2050 / KE2060 Y-axis reference; installed controller, encoder and mechanical fit remain unverified. |
|
Understand this reference
Application and identification
The retained supplier identifies 40000727 and TS4616N1020E200 together as a JUKI 2050/2060 Y-axis motor reference. Preserve both identifiers when requesting a quotation. The photograph retains the motor, leads and shaft, but does not establish the electrical rating, encoder option or installed fit of an offered unit. A Y-axis label is application context from the listing; it is not a reason to substitute another axis motor from the same machine family.
02 / Check before ordering
Match the installed part
The family page groups related variants; it does not imply that variants are interchangeable.
- Provide readable installed motor and machine labels, keeping 40000727 separate from the motor maker's model string.
- Ask the service team to identify the required shaft, mount, connector and feedback documentation for the actual axis.
- Request the declared condition and a clearly scoped test record for the offered motor; do not transfer another unit's result.
03 / Make a useful decision
Selection and replacement advice
Separate a repeat order for the documented installed assembly from a proposed motor cross-reference. For the former, verify the complete identification and supplied condition. For the latter, request the drawings, connector/feedback information and machine-specific basis that establish the proposed match. A similar shaft or mounting face is only part of the comparison. Compare repair and replacement after the responsible service team has defined the fault and acceptance scope; a turning demonstration alone does not prove integration with the intended axis.
04 / Care and handling
Maintenance and handling guidance
Retain the original axis symptom, motor identity and service history before a repair or exchange decision. Keep any diagnostic record in its original context rather than relabeling a general motion alarm as a confirmed motor failure.
Use the applicable equipment procedure for isolation, removal, handling and recommissioning. This catalogue is not a wiring guide and supplies no universal bearing, insulation, lubrication or vibration limit.
04 / Trace every claim
Sources, photos and condition
- JUKI 2050 2060 Y-axis motor TS4616N1020E200 40000727 · Supplier catalogue identification and application claims, not OEM authentication, installed fit or LCSMT stock.
Stock, authenticity, condition, test results and interchangeability require separate evidence. A family photograph cannot prove them.
05 / Before you ask
Questions about this family
Can an X-axis motor be chosen by appearance?
No substitution is established. Axis identity, mechanical interface, electrical/feedback requirements and applicable documentation must agree for the actual machine.
Do the two codes prove an OEM cross-reference?
They are paired in the supplier listing. A manufacturer or machine-specific reference is still required to approve the offered assembly.
Is the photographed motor tested or available?
No current offered unit or test has been verified. Ask for its own labels, condition declaration and agreed acceptance evidence.
06 / Keep the variant in context
Prepare a precise inquiry
Choose the complete part number and quantity, then open our inquiry form. Machine model, revision and installation evidence remain essential for matching.