Home / Open-frame visual inspection conveyor / SAMTRONIK SMA-1A050L
Model guide · unit evidence required
OverviewSAMTRONIK SMA-1A050L Inspection Conveyor
Provide an open-frame PCB transport and stopping position for manual visual inspection. Select SMA-1A050L from its own documented row. Its open frame and 500 mm reference length distinguish this scope from the enclosed SMA-2A guide. Other SMA-1A/1B variants and the inconsistent SMA-1A100XL length are excluded; the illustration does not prove the offered configuration.
Manufacturer-published model data
SAMTRONIK SMA-1A050L Technical Specifications
| Reference envelope | 500 x 695 x 920 mm for SMA-1A050L |
|---|---|
| PCB reference range | 50 x 50 to 445 x 330 mm |
| Transfer height | 910 mm +/- 30 mm; confirm the installed rail datum |
| Transport reference | Flat belt or chain; 0.5-20 m/min or specified |
| Supply reference | 220 VAC, 50/60 Hz; verify the nameplate |
| Approximate reference mass | 50 kg |
Manufacturer model data · Important: model-level figures and features are conditional manufacturer information, not guarantees for a particular used SAMTRONIK SMA-1A050L unit.
Key Features
Configuration Must Be Verified
The actual SAMTRONIK SMA-1A050L quote should identify the rails, belt or chain, sensors, stopping mechanism, PLC, interfaces, switches, frame and protection devices.
Buyer decision guide
When SAMTRONIK SMA-1A050L Makes Sense — and When It May Not
SAMTRONIK SMA-1A050L selection should begin with production requirements and evidence, not with a model name alone.
Typical Applications
Typical Applications for SAMTRONIK SMA-1A050L
Use SMA-1A050L between compatible PCB-processing stations after board support, transfer height, stopping and handshake have been checked. Select SMA-1A050L from its own documented row. Its open frame and 500 mm reference length distinguish this scope from the enclosed SMA-2A guide. Other SMA-1A/1B variants and the inconsistent SMA-1A100XL length are excluded; the illustration does not prove the offered configuration.
Before quotation
Three SAMTRONIK SMA-1A050L Buyer Questions
These questions keep the quotation scope connected to the buyer’s real SMT process.
1
Does the offered SMA-1A050L support the populated board and its edge clearances?
SAMTRONIK SMA-1A050L buyers should confirm this with actual-machine evidence before quotation.
2
How are inspection stop, release and reject handling demonstrated?
SAMTRONIK SMA-1A050L buyers should confirm this with actual-machine evidence before quotation.
3
What rail datum, direction and handshake match the connected stations?
SAMTRONIK SMA-1A050L buyers should confirm this with actual-machine evidence before quotation.
Running video confirmation
SAMTRONIK SMA-1A050L Running Video Review
Before shipment, review the relevant power-on, movement, operating state and visible condition for the specific offered unit.
This review page does not present a reference clip as proof of the actual machine. A reviewed unit-specific recording is required before it can be attached here.
- Power-on and visible operating-state confirmation
- board arrival, controlled stop, inspection release, automatic transfer and approved recovery
- Unit-specific condition evidence before export packing
Used-machine inspection
Inspection and Export Preparation for an Actual SAMTRONIK SMA-1A050L
- Nameplate and configurationModel, serial, year, voltage and installed options.
- Machine configurationMechanical, transport, sensing, camera, software and motion condition relevant to the quoted SAMTRONIK SMA-1A050L.
- Transport and softwareConveyor, sensors, program and line-interface evidence where applicable.
- Running and packing proofPower-on evidence, visible operation and export packing records.
Spare Parts
SAMTRONIK SMA-1A050L Spare Parts Scope
Request a unit-specific SAMTRONIK SMA-1A050L list for rails, belts or chain parts, sensors, stopping parts, PLC, switches and frame fittings. Availability is not claimed on this review page.
Quotation checklist
Provide SMA-1A050L identification, board data, transfer direction and height, inspection workflow, installed drawing and trial criteria, required accessories and desired inspection evidence for the proposed SAMTRONIK SMA-1A050L.
FAQ
Common questions for overseas buyers evaluating a SAMTRONIK SMA-1A050L.
01Variants
Does this SMA-1A050L guide establish SMA-1A100XL length?
No. The supplier table contains an unresolved length entry for that other variant. This guide uses the separate SMA-1A050L row and requires an offered-unit drawing.
02Scope
Does the SMA-1A050L illustration establish cooling or automatic defect inspection?
No. It is a model-reference illustration for manual visual inspection and PCB transfer. Fans, lighting, defect inspection and other options require separate evidence.
03Evidence
Does the SMA-1A050L reference image prove current stock?
No. It is a supplier-published model reference. Availability, serial number, condition, location, price and the fitted configuration require separate evidence for the offered unit.
Export packing proof
Export Packing and Container Loading
The V3 scrolling proof gallery is retained. It describes LCSMT export preparation, not the condition of a particular SAMTRONIK SMA-1A050L unit.
Send Your SAMTRONIK SMA-1A050L Production Requirement
Share SMA-1A050L identification, board data, transfer direction and height, inspection workflow, installed drawing and trial criteria and inspection expectations. LCSMT can review whether an actual SAMTRONIK SMA-1A050L configuration is a practical match.
SMA-1A050L sources and acceptance checks
Select SMA-1A050L from its own documented row. Its open frame and 500 mm reference length distinguish this scope from the enclosed SMA-2A guide. Other SMA-1A/1B variants and the inconsistent SMA-1A100XL length are excluded; the illustration does not prove the offered configuration.
SAMTRONIK exact-model or identified family product reference