SMT equipment sourcing · inspection · packing · global delivery

Home / Equipment category / Shimeiteng A6
Overview

Shimeiteng A6 Flying-Probe Functional Tester

Shimeiteng lists the A6 for powered functional checks and board-level signal tests. Choose the configuration from the nodes, stimulus and instrumentation required.

Official source recordedUnit evidence requiredInspection guideExport support
Manufacturer-published model data

Shimeiteng A6 Technical Specifications

Probe configurationThe source lists six probes across two sides.
Published area600 × 500 mm.
Test scopeThe A6 page lists node voltage, stimulus response and external instrument integration.

Manufacturer model information

Model data describes the published configuration. Confirm fitted options, utilities and condition for the unit offered.

Key Features

Configuration Must Be Verified

The A6 listing combines probing and external instrument integration. Specify the actual instruments, board fixtures and authorised powered-test sequence in the quote. Confirm which top and bottom nodes remain accessible once the board is supported.

Buyer decision guide

When Shimeiteng A6 Makes Sense — and When It May Not

Map board-edge connections and internal probe access. Define the approved powered sequence with the fixture, limits and interlocks.

Good application fitUse it where a defined set of functional checks can be carried out on accessible nodes and the integration can be repeated across board revisions. Establish how the system separates electrical failures from contact problems.
Where to check the limitsIf a production line already uses a dedicated fixture and has high unit volumes, compare access, required stimuli and the elapsed cycle on the same test plan before changing methods.

Shimeiteng A6 Acceptance Plan

Demonstrate the agreed sequence on a reference board and a representative known failure. Retain the instrument settings and measured responses.

  1. Map access and power safely

    Have qualified staff review node access, support and the approved power and measurement sequence. Confirm which connections are made by fixture and which are reached by moving probes.

  2. Compare the expected responses

    Run the same measurement on a known-good board and a reference failure. Record the fitted instrument, settings and the disposition at the intended test point.

  3. Time handling and retests

    Observe load, contact, powered checks and safe unload. Record how the system recovers from a failed contact and what must be repeated.

Typical Applications

Typical Applications for Shimeiteng A6

Assess assembled boards with a known power-up sequence and selected responses that matter to release. Bring one stable reference board and one controlled example with a known result.

Where fixtures or instrumentation are shared, document version, connection and release criteria. Include the most restrictive board geometry and the required instrument channels.

Before quotation

Three Shimeiteng A6 Buyer Questions

1

What must the process handle?

Send the drawing, sample or material that defines the hardest job. Review the probe configuration with that sample in view.

2

Which configuration is on offer?

Require the data plate and a configuration list with included items and separately priced options. Mark the setup used in the trial.

3

How will acceptance be measured?

Agree the result to keep from the trial and how it will be checked after transport. Include unresolved process limits on the order.

Running video confirmation

Shimeiteng A6 Running Video Review

Request a permitted, serial-linked recording of the fitted instrumentation and the actual board sequence. Show the observed response and its result record without exposing confidential programme data.

Request a dated recording tied to the offered machine's serial and tested sample. The preview opens the evidence request.

Shimeiteng A6 complete-machine preview for running-evidence requestRequest running video →Actual-unit recording on request
Used-machine inspection

Inspection and Export Preparation for an Actual Shimeiteng A6

  • Unit identityMatch the nameplate, electrical label and fitted options to the quotation. Keep any condition notes and missing accessories with that serial.
  • Inspection and maintenanceCheck the fitted probes and approved interlocks before resuming a powered program after service.
  • Acceptance recordKeep probe arrangement, instrument IDs, fixture drawing and approved interlock documentation with the quote. Identify which licences, cables and programme assets are included.
  • Export handoffAgree the transport state and the commissioning check. Request dated packing records for the actual unit before dispatch.
Spare Parts

Shimeiteng A6 Spare Parts Scope

Quote probe assemblies and tips, board support tooling, interface cables and service items for the installed instruments. Match the codes and programme revision before ordering.

Quotation checklist

Provide your application, sample details, destination utilities and required delivery scope. Ask the supplier to itemise configuration, service parts, installation and the evidence included with the offer.

Compare functional acceptance with repair diagnostics

A6 is listed for powered functional test coverage. F5 is positioned for fault isolation on failed assemblies. Use the same fault examples to decide whether production disposition, repair guidance or both are needed.

Shimeiteng F5 →

FAQ

Common questions for overseas buyers evaluating a Shimeiteng A6.

01Configuration

Will it replace a dedicated functional fixture?

Compare reachable nodes, instrument interfaces and cycle time using the same test plan.

02Selection

Can an external instrument be added without verifying software?

Check the communication method, programme support and approved fixture before buying. Include the exact instrument and an observed response in the acceptance test.

03Acceptance

How should a contact failure be logged?

Separate it from an electrical measurement failure. Retain the node, retry and observed response so coverage and cycle time remain interpretable.

Export packing proof

Export Packing and Container Loading

Agree restraints for probe hardware and protect separate instrumentation. Label cables and fixtures against the accepted setup and preserve an approved powered-check record for commissioning.

These photos show general export preparation. Request dated protection and loading photos for the specific unit before dispatch.

Crated equipment at a container door
Crated equipment at a container door
Secured cargo inside a container
Secured cargo inside a container
Wrapped machines in a staging area
Wrapped machines in a staging area
Crated equipment at a container door
Crated equipment at a container door
Secured cargo inside a container
Secured cargo inside a container
Wrapped machines in a staging area
Wrapped machines in a staging area

Send Your Shimeiteng A6 Production Requirement

Share the process, representative job and required evidence. Ask for the fitted configuration and a quotation that distinguishes the machine, tooling, services and delivery.