Home / CyberOptics SMT Machines / SE3000
Manufacturer-reference buyer guide
OverviewSE3000 3D Solder Paste Inspection System
CyberOptics SE3000 is now documented by Nordson as a 3D SPI platform. This local review draft distinguishes the published inspection envelope from the sensor, conveyor, software and condition of a particular used system.
Manufacturer-published model data
SE3000 Technical Specifications
| Sensing technology | Nordson describes the SE3000 family as a 3D SPI system using Multi-Reflection Suppression (MRS) sensor technology. |
|---|---|
| Published inspection speed | Nordson lists 35 cm²/s peak and 30 cm²/s average for the standard MRS sensor, with separate ultra-high-resolution figures. |
| Published resolution | The product page lists 18 µm for the MRS sensor and 9 µm for the ultra-high-resolution MRS sensor. |
| Published board range | Nordson lists SE3000 board sizes from 50 × 50 mm to 510 × 510 mm; larger X and XL variants have different limits. |
Important: model-level figures and features are conditional manufacturer information, not guarantees for a particular used SE3000 unit.
Key Features
Configuration Must Be Verified
The actual SE3000 quote should identify the installed heads, feeders, nozzles, software, voltage, accessories and visible condition.
Buyer decision guide
When SE3000 Makes Sense — and When It May Not
SE3000 selection should begin with production requirements and evidence, not with a model name alone.
Typical Applications
Typical Applications for SE3000
SE3000 should be evaluated against the buyer’s board dimensions, component mix, feeder plan, changeover profile and required line integration. The final application fit depends on the evidence for the specific unit.
Before quotation
Three SE3000 Buyer Questions
These questions keep the quotation scope connected to the buyer’s real SMT process.
1
Which paste deposits, board sizes and minimum features must the SE3000 inspect?
SE3000 buyers should confirm this with actual-machine evidence before quotation.
2
Which MRS sensor, conveyor configuration, software modules and process-feedback interfaces are installed?
SE3000 buyers should confirm this with actual-machine evidence before quotation.
3
What calibration, gauge-repeatability, live-inspection and packing evidence is required before quotation?
SE3000 buyers should confirm this with actual-machine evidence before quotation.
Running video confirmation
SE3000 Running Video Review
Before shipment, review power-on, conveyor transfer, MRS inspection state and visible machine condition for the specific offered unit.
Use the video to relate the SE3000’s recorded sensor configuration and inspection state to the actual machine; it does not certify a production result.
- Power-on and SPI cycle confirmation
- Conveyor transfer and enclosure condition
- MRS sensor and status evidence
Running video pendingA reviewed local video is not yet attached. Open this panel for unit-specific proof.
Used-machine inspection
Inspection and Export Preparation for an Actual SE3000
- Nameplate and configurationModel, serial, year, voltage and installed options.
- Placement hardwareHead, nozzle, feeder, camera and motion condition relevant to the quoted SE3000.
- Transport and softwareConveyor, sensors, program and line-interface evidence where applicable.
- Running and packing proofPower-on evidence, visible operation and export packing records.
Spare Parts
SE3000 Spare Parts Scope
Request a unit-specific SE3000 list for heads, nozzles, feeders, cameras, filters, belts and recommended maintenance items. Availability is not claimed on this review page.
Quotation checklist
Provide PCB dimensions, component range, throughput target, feeder package, voltage, destination, required accessories and desired inspection evidence for the proposed SE3000.
FAQ
Common questions for overseas buyers evaluating a SE3000.
01Speed figures
Do published cm²/s figures guarantee production output?
No. They depend on the selected sensor, program, board and inspection criteria.
02Variant selection
Why distinguish SE3000 from SE3000-X or XL?
Nordson lists different board-size ranges, so the actual variant must be confirmed.
03Used-system proof
What evidence is needed?
Request machine identity, sensor specification, calibration, software/license scope, test results and power-on evidence.
Export packing proof
Export Packing and Container Loading
The V3 scrolling proof gallery is retained. It describes LCSMT export preparation, not the condition of a particular SE3000 unit.
Send Your SE3000 Production Requirement
Share PCB size, component range, required throughput, feeder strategy, voltage, destination and inspection expectations. LCSMT can review whether an actual SE3000 configuration is a practical match.