Home / GKG Equipment / GKG G-Tera
Model guide · unit evidence required
OverviewGKG G-Tera Automatic Stencil Printer
GKG G-Tera is an automatic stencil printer using a LIGHT-Bolt fiducial camera and programmable conveyor staging. Its printing, alignment and cleaning setup must be qualified on the actual board and paste process. Compare G-Tera around board support and repeatable deposits. Optional jetting, automatic replenishment and stencil exchange must be identified in the offer; they are not inferred from the reference image.
Manufacturer-published model data
GKG G-Tera Technical Specifications
| Fiducial camera | 3.0 MP LIGHT-Bolt CCD |
|---|---|
| Published cycle definitions | 5.2 seconds core excludes printing/cleaning; 12.5 seconds actual includes them |
| Maximum board size | Single-stage 510 × 510 mm; three-stage 265 × 510 mm, optional 400 × 510 mm |
| Board limits | 0.4–6 mm thickness; up to 5 kg |
| Minimum board size | 50 × 50 mm |
Manufacturer model data · Important: model-level figures and features are conditional manufacturer information, not guarantees for a particular used GKG G-Tera unit.
Key Features
Configuration Must Be Verified
The offer must identify G-Tera serial, support tooling, conveyor staging, stencil frame, squeegee, cleaning arrangement and installed automation options; Actual paste deposits, alignment repeatability, board transfer, underside clearance, cleaning recovery and recipe backup.
Buyer decision guide
When GKG G-Tera Makes Sense — and When It May Not
GKG G-Tera selection should begin with production requirements and evidence, not with a model name alone.
Application qualification
GKG G-Tera Acceptance Plan
Evaluate deposits rather than a headline cycle
For a G-Tera enquiry, supply the assembly drawing, stencil details, paste and required deposit acceptance method. Ask the supplier to retain the trial settings and measurements at representative fine and large apertures. Compare complete board-to-board time including printing and the agreed cleaning schedule, not an isolated transfer number. Record the program and material conditions with every result so the process team can repeat the evaluation rather than accept a polished empty-machine demonstration.
Choose support and staging as a configuration
Identify the required PCB mass, bow, underside components and rail edges before choosing conveyor staging. Request a drawing of the actual support pins, bars or vacuum tooling and witness transfer without board damage. Ask how the machine handles the required board size in its installed mode; a single-stage maximum is not a three-stage guarantee. Confirm stencil frame, clamping, squeegee condition and service access on the offered serial, not only in a catalogue picture.
Keep automation and sourcing claims separate
List the installed cleaning hardware and any jetting, replenishment or stencil-exchange options separately in the offer. Demonstrate recovery after the approved cleaning and changeover sequence, with recipes and computer backups supplied. GKG’s China exhibition record corroborates this model, while an independently indexed Shenzhen listing supplies only an enquiry lead: its direct page was unavailable and its index may be stale. Obtain a dated serial, location, configuration and operating record before treating any listing as available equipment.
Typical Applications
Typical Applications for GKG G-Tera
GKG G-Tera should be evaluated against the buyer’s apply solder paste through a stencil to supported pcb assemblies before placement. check deposit results with the intended board, stencil and paste rather than relying on an empty-machine cycle demonstration. The final application fit depends on the evidence for the specific unit.
Before quotation
Three GKG G-Tera Buyer Questions
These questions keep the quotation scope connected to the buyer’s real SMT process.
1
Which fiducial camera requirement must the proposed GKG G-Tera demonstrate?
GKG G-Tera buyers should confirm this with actual-machine evidence before quotation.
2
What is included in this GKG G-Tera offer: g-tera serial, support tooling, conveyor staging, stencil frame, squeegee, cleaning arrangement and installed automation options?
GKG G-Tera buyers should confirm this with actual-machine evidence before quotation.
3
Can the GKG G-Tera acceptance run document actual paste deposits, alignment repeatability, board transfer, underside clearance, cleaning recovery and recipe backup?
GKG G-Tera buyers should confirm this with actual-machine evidence before quotation.
Running video confirmation
GKG G-Tera Running Video Review
Before shipment, review the relevant power-on, movement, operating state and visible condition for the specific offered unit.
Request a dated operating sequence of the offered GKG G-Tera. The model-image control requests evidence, not playback of a recorded video.
- Power-on and visible operating-state confirmation
- Apply solder paste through a stencil to supported PCB assemblies before placement. Check deposit results with the intended board, stencil and paste rather than relying on an empty-machine cycle demonstration.
- Unit-specific condition evidence before export packing
Used-machine inspection
Inspection and Export Preparation for an Actual GKG G-Tera
- Nameplate and configurationModel, serial, year, voltage and installed options.
- Machine configurationMechanical, transport, sensing, camera, software and motion condition relevant to the quoted GKG G-Tera.
- Transport and softwareConveyor, sensors, program and line-interface evidence where applicable.
- Running and packing proofPower-on evidence, visible operation and export packing records.
Spare Parts
GKG G-Tera Spare Parts Scope
Request a unit-specific GKG G-Tera list for compatible squeegees, support pins or vacuum tooling, cleaning service items, conveyor parts and authorized recipe backups. Availability is not claimed on this review page.
Quotation checklist
Provide target assembly, process requirements, fiducial camera, installed configuration and destination, required accessories and desired inspection evidence for the proposed GKG G-Tera.
FAQ
Common questions for overseas buyers evaluating a GKG G-Tera.
01Application
Which production task suits GKG G-Tera?
Apply solder paste through a stencil to supported PCB assemblies before placement. Check deposit results with the intended board, stencil and paste rather than relying on an empty-machine cycle demonstration. Compare G-Tera around board support and repeatable deposits. Optional jetting, automatic replenishment and stencil exchange must be identified in the offer; they are not inferred from the reference image.
02Configuration
What should a buyer confirm for GKG G-Tera?
G-Tera serial, support tooling, conveyor staging, stencil frame, squeegee, cleaning arrangement and installed automation options. Request the exact nameplate and option list.
03Unit evidence
Does this GKG G-Tera illustration prove stock?
The GKG G-Tera illustration is model-reference imagery, not a dated stock photograph. Serial, location, condition, price and running evidence require separate confirmation.
Export packing proof
Export Packing and Container Loading
The V3 scrolling proof gallery is retained. It describes LCSMT export preparation, not the condition of a particular GKG G-Tera unit.
Send Your GKG G-Tera Production Requirement
Share target assembly, process requirements, fiducial camera, installed configuration and destination and inspection expectations. LCSMT can review whether an actual GKG G-Tera configuration is a practical match.