Eight-spindle head arrangement
HM520W MF
- Head
- 8 spindles × 2 gantries
- Optimum speed
- 52,000 CPH
- Accuracy
- ±25 μm; Cpk ≥ 1.0
Home / Hanwha Equipment / Hanwha HM520W
Model guide · unit evidence required
OverviewHanwha HM520W Flexible Pick and Place Machine
The Hanwha HM520W is a wide flexible SMT placement platform with MF and HP head configurations that must be compared separately. Match the difficult component list to the actual head and pickup tools. The optimum MF rate and HP accuracy are not one simultaneous performance guarantee.
One family · configuration choices
Compare HM520W versions
Mixed-component PCB placement where the installed head, component envelope and feeder plan determine whether a proposed job fits.. Select by the actual board envelope, optical configuration and installation space—not the suffix alone.
Three-spindle head arrangement
HM520W HP
- Head
- 3 spindles × 2 gantries
- Optimum speed
- 22,000 CPH
- Accuracy
- ±20 μm; Cpk ≥ 1.0
What the versions share
- Selection
- Identify the actual front and rear heads.
- Conditions
- Published optimum values are configuration-specific.
Current Hanwha HM520W MF/HP specification, checked 4 October 2026. Figures describe standard model configurations, not stock or an offered unit. Dimensions are listed in the source order and exclude the tower light where stated. The reference image identifies HM520W, not proof of the installed head choice. Request nameplate, configuration and board-trial evidence before selection.
Manufacturer-published model data
Hanwha HM520W Technical Specifications
| Mf configuration | 8 spindles × 2 gantries |
|---|---|
| Mf optimum speed | 52,000 CPH under manufacturer optimum conditions |
| Mf placement accuracy | ±25 μm at Cpk ≥ 1.0 |
| Hp configuration | 3 spindles × 2 gantries |
| Hp optimum speed | 22,000 CPH under manufacturer optimum conditions |
| Hp placement accuracy | ±20 μm at Cpk ≥ 1.0 |
| Published dimensions | L 1,390 × D 2,370 × H 1,980 mm |
Manufacturer model data · Important: model-level figures and features are conditional manufacturer information, not guarantees for a particular used Hanwha HM520W unit.
Key Features
Configuration Must Be Verified
The offer must identify Front/rear head combination, nozzles, feeders, recognition options, conveyor and licenses; Representative-board cycle, recognition rejects, calibration and measured placement results.
Buyer decision guide
When Hanwha HM520W Makes Sense — and When It May Not
Hanwha HM520W selection should begin with production requirements and evidence, not with a model name alone.
Application qualification
Hanwha HM520W Acceptance Plan
Keep the MF and HP columns separate
For an HM520W offer, ask for photographs of both installed heads and their identification. Map fine chips, long connectors, large packages and unusual pickup surfaces to the proposed head and tool. The best MF speed and the best HP accuracy describe different configurations; combining them into one promised number would hide the actual selection trade-off.
Time the populated board
Send a representative bill of materials and board revision, including the slow or difficult placements. Record the complete program cycle, feeder replenishment, recognition rejects and manual intervention. Compare the proposed line balance with printing and inspection. A brochure CPH figure is useful for comparison of stated optimum conditions, not as a delivered finished-board rate.
Inspect the machine behind the model name
Before purchase, request the actual serial, head and feeder list, calibration record, transport condition and software option screen. Review a measured placement sample using the agreed method. Public China sales leads can help locate a machine, but none establishes the condition, accessories, price or availability of the particular unit you will be offered.
Typical Applications
Typical Applications for Hanwha HM520W
Hanwha HM520W should be evaluated against the buyer’s mixed-component pcb placement where the installed head, component envelope and feeder plan determine whether a proposed job fits. The final application fit depends on the evidence for the specific unit.
Before quotation
Three Hanwha HM520W Buyer Questions
These questions keep the quotation scope connected to the buyer’s real SMT process.
1
Which mf configuration requirement must the proposed Hanwha HM520W demonstrate?
Hanwha HM520W buyers should confirm this with actual-machine evidence before quotation.
2
What is included in this Hanwha HM520W offer: front/rear head combination, nozzles, feeders, recognition options, conveyor and licenses?
Hanwha HM520W buyers should confirm this with actual-machine evidence before quotation.
3
Can the Hanwha HM520W acceptance run document representative-board cycle, recognition rejects, calibration and measured placement results?
Hanwha HM520W buyers should confirm this with actual-machine evidence before quotation.
Running video confirmation
Hanwha HM520W Running Video Review
Before shipment, review the relevant power-on, movement, operating state and visible condition for the specific offered unit.
Request an operating sequence of the offered Hanwha HM520W. The model-image control requests evidence; it does not play a recorded video.
- Power-on and visible operating-state confirmation
- Mixed-component PCB placement where the installed head, component envelope and feeder plan determine whether a proposed job fits.
- Unit-specific condition evidence before export packing
Used-machine inspection
Inspection and Export Preparation for an Actual Hanwha HM520W
- Nameplate and configurationModel, serial, year, voltage and installed options.
- Machine configurationMechanical, transport, sensing, camera, software and motion condition relevant to the quoted Hanwha HM520W.
- Transport and softwareConveyor, sensors, program and line-interface evidence where applicable.
- Running and packing proofPower-on evidence, visible operation and export packing records.
Spare Parts
Hanwha HM520W Spare Parts Scope
Request a unit-specific Hanwha HM520W list for matched nozzles, feeders, head service items, recognition hardware, belts and board supports. Availability is not claimed on this review page.
Quotation checklist
Provide target assembly, process requirements, mf configuration, installed configuration and destination, required accessories and desired inspection evidence for the proposed Hanwha HM520W.
FAQ
Common questions for overseas buyers evaluating a Hanwha HM520W.
01Application
Which production task suits Hanwha HM520W?
Mixed-component PCB placement where the installed head, component envelope and feeder plan determine whether a proposed job fits. Match the difficult component list to the actual head and pickup tools. The optimum MF rate and HP accuracy are not one simultaneous performance guarantee.
02Configuration
What should a buyer confirm for Hanwha HM520W?
Front/rear head combination, nozzles, feeders, recognition options, conveyor and licenses. Request the exact nameplate and option list.
03Unit evidence
Does this Hanwha HM520W illustration prove stock?
The Hanwha HM520W illustration is model-reference imagery, not a dated stock photograph. Serial, location, condition, price and running evidence require separate confirmation.
Export packing proof
Export Packing and Container Loading
The V3 scrolling proof gallery is retained. It describes LCSMT export preparation, not the condition of a particular Hanwha HM520W unit.
Send Your Hanwha HM520W Production Requirement
Share target assembly, process requirements, mf configuration, installed configuration and destination and inspection expectations. LCSMT can review whether an actual Hanwha HM520W configuration is a practical match.