Home / JT Equipment / JT KT Series
Model guide · unit evidence required
OverviewJT KT Series High-throughput Nitrogen Reflow Oven
The JT KT Series is a higher-throughput convection reflow range with zone-by-zone nitrogen monitoring, staged flux collection and configurable cooling. Shortlist KT for line-rate and atmosphere requirements that can be demonstrated together. A catalogue chain speed is not finished-board throughput or proof of the required joint profile.
Manufacturer-published model data
JT KT Series Technical Specifications
| Process | Lead-free hot-air convection reflow |
|---|---|
| Conveyor-speed claim | Manufacturer describes normal-production chain speed up to 160 cm/min; a board trial must establish the usable rate |
| Atmosphere monitoring | Independent inspection/display of oxygen across temperature zones is described |
| Cooling option | Multizone double-sided cooling is optional; effective cooling length up to 1,400 mm is described |
| Flux collection | Two-stage recovery with multiple collection points |
Manufacturer model data · Important: model-level figures and features are conditional manufacturer information, not guarantees for a particular used JT KT Series unit.
Key Features
Configuration Must Be Verified
The offer must identify Exact KT variant, heating zones, rails, oxygen sampling, recovery stages and fitted cooling option; Thermal trace at proposed line speed, zone oxygen log, exit temperature, tracking and flux-recovery inspection.
Buyer decision guide
When JT KT Series Makes Sense — and When It May Not
JT KT Series selection should begin with production requirements and evidence, not with a model name alone.
Application qualification
JT KT Series Acceptance Plan
Balance the whole line
For JT KT selection, compare board spacing and transfer demand with printing, placement and inspection. The stated chain speed must be translated into an actual board sequence, including pitch and any rail sharing. Ask for a profile at the proposed load rather than accepting a demonstration with an empty conveyor. Keep the slowest required assembly in the trial; a simple sample cannot establish the throughput of a large copper-heavy or mixed-thermal-mass product.
Do not combine best-case claims
KT temperature-control and oxygen statements describe manufacturer conditions, not simultaneous guarantees for every configuration. Identify sensor locations and the installed monitoring hardware. Retain a representative loaded-board profile with the oxygen readings and speed used for that run. Changes in nitrogen flow, exhaust, board spacing or cooling can affect the process. Require the responsible process engineer to set acceptance limits instead of adopting every advertised minimum as a purchase tolerance.
Make cooling part of the order
The KT source describes optional multizone double-sided cooling. Ask which modules the seller actually includes, how they are controlled and what maintenance access they need. Measure the board’s exit temperature and cooling behavior on the assembly used for acceptance. Inspect the two-stage flux-recovery path while safely isolated and request a cleaning record. Optional cooling length, a reference cabinet and a claimed energy saving do not establish the delivered cooling performance or operating cost.
Typical Applications
Typical Applications for JT KT Series
JT KT Series should be evaluated against the buyer’s reflow of high-volume or thermally demanding pcb assemblies with a qualified conveyor speed, board-temperature profile and cooling arrangement. The final application fit depends on the evidence for the specific unit.
Before quotation
Three JT KT Series Buyer Questions
These questions keep the quotation scope connected to the buyer’s real SMT process.
1
Which process requirement must the proposed JT KT Series demonstrate?
JT KT Series buyers should confirm this with actual-machine evidence before quotation.
2
What is included in this JT KT Series offer: exact kt variant, heating zones, rails, oxygen sampling, recovery stages and fitted cooling option?
JT KT Series buyers should confirm this with actual-machine evidence before quotation.
3
Can the JT KT Series acceptance run document thermal trace at proposed line speed, zone oxygen log, exit temperature, tracking and flux-recovery inspection?
JT KT Series buyers should confirm this with actual-machine evidence before quotation.
Running video confirmation
JT KT Series Running Video Review
Before shipment, review the relevant power-on, movement, operating state and visible condition for the specific offered unit.
Request a dated operating sequence of the offered JT KT Series. The model-image control requests evidence, not playback of a recorded video.
- Power-on and visible operating-state confirmation
- Reflow of high-volume or thermally demanding PCB assemblies with a qualified conveyor speed, board-temperature profile and cooling arrangement.
- Unit-specific condition evidence before export packing
Used-machine inspection
Inspection and Export Preparation for an Actual JT KT Series
- Nameplate and configurationModel, serial, year, voltage and installed options.
- Machine configurationMechanical, transport, sensing, camera, software and motion condition relevant to the quoted JT KT Series.
- Transport and softwareConveyor, sensors, program and line-interface evidence where applicable.
- Running and packing proofPower-on evidence, visible operation and export packing records.
Spare Parts
JT KT Series Spare Parts Scope
Request a unit-specific JT KT Series list for zone fans, heaters, conveyor service items, collector filters, nitrogen plumbing and calibrated oxygen sensors. Availability is not claimed on this review page.
Quotation checklist
Provide target assembly, process requirements, process, installed configuration and destination, required accessories and desired inspection evidence for the proposed JT KT Series.
FAQ
Common questions for overseas buyers evaluating a JT KT Series.
01Application
Which production task suits JT KT Series?
Reflow of high-volume or thermally demanding PCB assemblies with a qualified conveyor speed, board-temperature profile and cooling arrangement. Shortlist KT for line-rate and atmosphere requirements that can be demonstrated together. A catalogue chain speed is not finished-board throughput or proof of the required joint profile.
02Configuration
What should a buyer confirm for JT KT Series?
Exact KT variant, heating zones, rails, oxygen sampling, recovery stages and fitted cooling option. Request the exact nameplate and option list.
03Unit evidence
Does this JT KT Series illustration prove stock?
The JT KT Series illustration is model-reference imagery, not a dated stock photograph. Serial, location, condition, price and running evidence require separate confirmation.
Export packing proof
Export Packing and Container Loading
The V3 scrolling proof gallery is retained. It describes LCSMT export preparation, not the condition of a particular JT KT Series unit.
Send Your JT KT Series Production Requirement
Share target assembly, process requirements, process, installed configuration and destination and inspection expectations. LCSMT can review whether an actual JT KT Series configuration is a practical match.