FUJI / SMT spare parts
FUJI H04 AA06Y04 nozzle
Preserve both source-listed identifiers for this H04 nozzle reference. A visible size marking is not a complete dimensioned drawing or acceptance result.
Selected part reference
AA06Y04 / R19-018-155
Source-listed reference. Exact fit, condition and availability require confirmation.
H04 source-listed nozzle
- Model
- H04 source-listed nozzle
- Part code
- AA06Y04 / R19-018-155
- Fit
- Confirm by unit
Photographs are bound to the selected part number. Reference images do not establish current inventory or interchangeability.
01 / Select precisely
Compare the family variants
Compare the complete part numbers, revisions and documented specifications. Similar appearance does not establish interchangeability.
| Variant | Part number | Compatibility | Specifications |
|---|---|---|---|
| H04 source-listed nozzle | AA06Y04 / R19-018-155 | Supplier-described FUJI NXT H04 reference. Exact head revision and component/process suitability are not independently verified. |
|
Understand this reference
Application and identification
The retained supplier page pairs AA06Y04 and R19-018-155 with an H04 nozzle description. It also uses an isolated diameter value in its prose. This draft preserves the ordering identifiers but does not turn that short wording or the photo's marking into a complete dimensional specification. The H04 family narrows the question; the installed head, nozzle interface and intended component still need their own documented match.
02 / Check before ordering
Match the installed part
The family page groups related variants; it does not imply that variants are interchangeable.
- Keep AA06Y04 and R19-018-155 together and resolve any offered suffix or code difference before ordering.
- Request a drawing with units and measurement definitions for the contact geometry that matters to the application.
- Match the installed head/revision and retain the basis for component/process suitability separately from catalogue identity.
03 / Make a useful decision
Selection and replacement advice
Compare an exact-code repeat order with a proposed alternative by documented geometry and head suitability. Ask for a readable identification view plus contact-face and interface evidence when those views are needed for the decision. Another H04-labelled nozzle is not an automatic substitute, and another head family should not be chosen by apparent tip size. Establish the acceptance scope for the actual component and process rather than selecting from thumbnail proportions.
04 / Care and handling
Maintenance and handling guidance
Record nozzle identity, head position and the observed symptom before service or replacement. Keep uncertain markings visible as an evidence gap rather than assigning a new code after cleaning.
Use the applicable FUJI head/nozzle maintenance procedure. This reference supplies no universal cleaning pressure, solvent, ultrasonic setting, wear threshold or replacement interval.
04 / Trace every claim
Sources, photos and condition
- Fuji NXT H04 nozzle AA06Y04 R19-018-155 · Supplier catalogue identification and application claims, not OEM authentication, installed fit or LCSMT stock.
Stock, authenticity, condition, test results and interchangeability require separate evidence. A family photograph cannot prove them.
05 / Before you ask
Questions about this family
Can the visible marking replace a drawing?
No. It does not establish every dimension, tolerance or measurement definition required for the actual application.
Are all H04 nozzles interchangeable?
No interchangeability is claimed. Preserve the exact nozzle codes and applicable head documentation.
Does the catalogue photo establish tip condition?
No. Ask for the actual offered nozzle's relevant views and agreed inspection evidence; the source photograph is a reference.
06 / Keep the variant in context
Prepare a precise inquiry
Choose the complete part number and quantity, then open our inquiry form. Machine model, revision and installation evidence remain essential for matching.