SMT equipment sourcing · inspection · packing · global delivery

Home / Equipment category / SAMTRONIK SM-CSUV990
Overview

SAMTRONIK SM-CSUV990 Inline Infrared Curing Oven

Samtronik identifies the three-metre infrared curing reference as SM-CSUV990. Evaluate it using the actual coating and the temperature experienced by the board.

Official source recordedUnit evidence requiredInspection guideExport support
Manufacturer-published model data

SAMTRONIK SM-CSUV990 Technical Specifications

Exact referenceThe supplier identifies a customized SM-CSUV990 configuration with HMI.
TransportThe documented reference has a front fixed rail and left-to-right movement.
ProcessThe source describes infrared curing. Confirm the installed heating modules for the quotation.

Manufacturer model information

Model data describes the published configuration. Confirm fitted options, utilities and condition for the unit offered.

Key Features

Configuration Must Be Verified

The manufacturer's listing names a customized SM-CSUV990 with a front fixed rail and left-to-right conveyor. Ask for the fitted heating modules, transport range and control revision. The three-metre description is a cabinet reference.

Buyer decision guide

When SAMTRONIK SM-CSUV990 Makes Sense — and When It May Not

Use the coating data sheet and board or pallet weight to define the cure requirement. Identify any heat-sensitive components.

Good application fitConsider it for a coating or material whose qualified process can be achieved with infrared heating and the actual board loading. Measure the surface temperatures and confirm the material supplier's cure check.
Where to check the limitsA heavy carrier or a reflective/shadowed area can produce different temperatures within the same panel. If the material requires a different cure mechanism, obtain a process decision before selecting the oven.

SAMTRONIK SM-CSUV990 Acceptance Plan

Measure representative surface temperatures on the conveyor. Verify cure condition and check for hot and cool positions within the loaded board.

  1. Start with material requirements

    Use the technical data for the coating or adhesive and identify board temperature limits. Agree the locations to measure and the inspection that will establish cure.

  2. Profile the loaded panel

    Instrument the representative board under its planned orientation and spacing. Keep conveyor speed and setpoints with the measured temperatures.

  3. Validate process recovery

    Repeat after the normal transition between loads. Compare the measured profile and cure result at the critical locations, and note any change in clearance or board support.

Typical Applications

Typical Applications for SAMTRONIK SM-CSUV990

Evaluate coated assemblies with both light and heavy areas. Keep a witness sample from the region expected to run cool and another from a heat-sensitive location.

For a mixed product line, check repeatability after a recipe or loading change. Confirm that the approved cure window is met before sending boards to the next step.

Before quotation

Three SAMTRONIK SM-CSUV990 Buyer Questions

1

What must the process handle?

Send the drawing, sample or material that defines the hardest job. Review the exact reference with that sample in view.

2

Which configuration is on offer?

Require the data plate and a configuration list with included items and separately priced options. Mark the setup used in the trial.

3

How will acceptance be measured?

Agree the result to keep from the trial and how it will be checked after transport. Include unresolved process limits on the order.

Running video confirmation

SAMTRONIK SM-CSUV990 Running Video Review

Show the serial plate, fitted controls and conveyor with the test carrier loaded. Attach the measured temperature record and cure observation for that carrier.

Request a dated recording tied to the offered machine's serial and tested sample. The preview opens the evidence request.

SAMTRONIK SM-CSUV990 complete-machine preview for running-evidence requestRequest running video →Actual-unit recording on request
Used-machine inspection

Inspection and Export Preparation for an Actual SAMTRONIK SM-CSUV990

  • Unit identityMatch the nameplate, electrical label and fitted options to the quotation. Keep any condition notes and missing accessories with that serial.
  • Inspection and maintenanceCheck rail operation, extraction and heating condition with the machine isolated. Repeat the measured profile after heater service.
  • Acceptance recordVerify heater configuration, exhaust, HMI version and transfer interface on the actual serial. Agree the receiving site's utility and service checks and confirm which process records are included.
  • Export handoffAgree the transport state and the commissioning check. Request dated packing records for the actual unit before dispatch.
Spare Parts

SAMTRONIK SM-CSUV990 Spare Parts Scope

Ask for fitted emitter, controller, sensor and conveyor part codes. Check serial compatibility for replacement heaters and retain the baseline profile for the post-service test.

Quotation checklist

Provide your application, sample details, destination utilities and required delivery scope. Ask the supplier to itemise configuration, service parts, installation and the evidence included with the offer.

Compare infrared cure with solder reflow

SM-CSUV990 is documented as an infrared curing reference. Pyramax 125N is a solder reflow oven with a different process purpose. Compare the material limits and required board profile before quoting either station.

BTU Pyramax 125N →

FAQ

Common questions for overseas buyers evaluating a SAMTRONIK SM-CSUV990.

01Configuration

Is the three-metre label a recipe specification?

It identifies the listed system. Ask for the heating layout, belt speed range and the actual cure demonstration.

02Selection

Can a displayed setpoint establish cure?

Measure the actual board at representative locations and use the material supplier's cure verification. The controller display is only one input to that record.

03Acceptance

How should a heater replacement be accepted?

Confirm the correct emitter and fitted control before service. Repeat the established loaded-panel profile and verify the cure check under the approved conditions.

Export packing proof

Export Packing and Container Loading

Protect the heater and conveyor as specified for the serial. Label any detached rail or exhaust fittings and include the recipe and post-transport inspection procedure.

These photos show general export preparation. Request dated protection and loading photos for the specific unit before dispatch.

Crated equipment at a container door
Crated equipment at a container door
Secured cargo inside a container
Secured cargo inside a container
Wrapped machines in a staging area
Wrapped machines in a staging area
Crated equipment at a container door
Crated equipment at a container door
Secured cargo inside a container
Secured cargo inside a container
Wrapped machines in a staging area
Wrapped machines in a staging area

Send Your SAMTRONIK SM-CSUV990 Production Requirement

Share the process, representative job and required evidence. Ask for the fitted configuration and a quotation that distinguishes the machine, tooling, services and delivery.