PCB Inspection Conveyor Family
SMA-2A070L
- Maximum PCB (L x W)
- 445 x 330 mm
- Machine dimensions (L x W x H)
- 700 x 742 x 920 mm
- Reference mass
- 75 kg
Home / Open PCB inspection conveyor / SAMTRONIK SMA-2A
Model guide · unit evidence required
OverviewSAMTRONIK SMA-2A PCB Inspection Conveyor Family
Stop and transfer compatible PCBs at an open visual-inspection station. Choose the board-width and length envelope together with the actual stopping sequence. The source header contains a contradictory 100 cm conveying-length entry for SMA-2A070L; use the model table and offered drawing instead.
One family · configuration choices
Compare SMA-2A versions
Open visual inspection and controlled PCB transfer. Select by the actual board envelope, transfer arrangement and installation space—not the suffix alone.
PCB Inspection Conveyor Family
SMA-2A100L
- Maximum PCB (L x W)
- 445 x 330 mm
- Machine dimensions (L x W x H)
- 1000 x 742 x 920 mm
- Reference mass
- 95 kg
PCB Inspection Conveyor Family
SMA-2A100XL
- Maximum PCB (L x W)
- 530 x 460 mm
- Machine dimensions (L x W x H)
- 1000 x 880 x 920 mm
- Reference mass
- 110 kg
What the versions share
- Speed
- 0.5-20 m/min reference or specified configuration
- Supply
- 220 VAC, 50/60 Hz reference
- Transfer
- Flat belt or chain; confirm fitted arrangement
Variant figures use the SAMTRONIK manufacturer desktop product table archived 2026-10-08. The mobile catalogue corroborates the listing identity only. Figures describe standard model configurations, not stock or an offered unit. Dimensions are listed in the source order and exclude the tower light where stated. Choose length and board width from the offered suffix and drawing. SMA-2B060 variants need a separate chassis comparison and are not included as identical configurations. Request nameplate, configuration and board-trial evidence before selection.
Manufacturer-published model data
SAMTRONIK SMA-2A Technical Specifications
| Compared configurations | SMA-2A070L, SMA-2A100L and SMA-2A100XL |
|---|---|
| Transfer arrangement | Flat belt or chain according to the listing; verify the actual fitted arrangement |
| Conveyor speed | 0.5-20 m/min reference or specified configuration |
| Supply reference | 220 VAC, 50/60 Hz |
| Interface | SMEMA |
| Section arrangement | One or two sections in the title; fitted number and stopping sequence require confirmation |
Manufacturer model data · Important: model-level figures and features are conditional manufacturer information, not guarantees for a particular used SAMTRONIK SMA-2A unit.
Key Features
Configuration Must Be Verified
The actual SAMTRONIK SMA-2A quote should identify the belt or chain, guides, stop sensors, width setting, control logic and line interface.
Buyer decision guide
When SAMTRONIK SMA-2A Makes Sense — and When It May Not
SAMTRONIK SMA-2A selection should begin with production requirements and evidence, not with a model name alone.
Typical Applications
Typical Applications for SAMTRONIK SMA-2A
Use an SMA-2A conveyor between line stages when operators need an inspection stop and the board must pass to the next machine under line control. Choose the board-width and length envelope together with the actual stopping sequence. The source header contains a contradictory 100 cm conveying-length entry for SMA-2A070L; use the model table and offered drawing instead.
Before quotation
Three SAMTRONIK SMA-2A Buyer Questions
These questions keep the quotation scope connected to the buyer’s real SMT process.
1
Which SMA-2A suffix, transfer type and section count will be supplied?
SAMTRONIK SMA-2A buyers should confirm this with actual-machine evidence before quotation.
2
Do the populated board and edge-contact limits fit the offered guides?
SAMTRONIK SMA-2A buyers should confirm this with actual-machine evidence before quotation.
3
Can inspection stops, line holds and authorized recovery pass a board trial?
SAMTRONIK SMA-2A buyers should confirm this with actual-machine evidence before quotation.
Running video confirmation
SAMTRONIK SMA-2A Running Video Review
Before shipment, review the relevant power-on, movement, operating state and visible condition for the specific offered unit.
This review page does not present a reference clip as proof of the actual machine. A reviewed unit-specific recording is required before it can be attached here.
- Power-on and visible operating-state confirmation
- width setting, inspection stop, board handoff, line hold and authorized recovery
- Unit-specific condition evidence before export packing
Used-machine inspection
Inspection and Export Preparation for an Actual SAMTRONIK SMA-2A
- Nameplate and configurationModel, serial, year, voltage and installed options.
- Machine configurationMechanical, transport, sensing, camera, software and motion condition relevant to the quoted SAMTRONIK SMA-2A.
- Transport and softwareConveyor, sensors, program and line-interface evidence where applicable.
- Running and packing proofPower-on evidence, visible operation and export packing records.
Spare Parts
SAMTRONIK SMA-2A Spare Parts Scope
Request a unit-specific SAMTRONIK SMA-2A list for belts or chains, guides, sensors, width-adjustment parts and controller parts. Availability is not claimed on this review page.
Quotation checklist
Provide exact suffix, board dimensions and clearance, edge restrictions, transfer type, section count and stop sequence, required accessories and desired inspection evidence for the proposed SAMTRONIK SMA-2A.
FAQ
Common questions for overseas buyers evaluating a SAMTRONIK SMA-2A.
01Length
Does the SMA-2A070L listing prove a 100 cm conveying span?
No. The header conflicts with the 700 mm chassis entry. Confirm the usable transfer span on the offered drawing.
02Related models
Are the SMA-2B060 entries identical SMA-2A configurations?
Do not assume that. They have different table heights and require a separate chassis and transfer-purpose comparison before substitution.
03Evidence
Does the SMA-2A reference image prove current stock?
No. It is a supplier-published model reference. Availability, serial number, condition, location, price and the fitted configuration require separate evidence for the offered unit.
Export packing proof
Export Packing and Container Loading
The V3 scrolling proof gallery is retained. It describes LCSMT export preparation, not the condition of a particular SAMTRONIK SMA-2A unit.
Send Your SAMTRONIK SMA-2A Production Requirement
Share exact suffix, board dimensions and clearance, edge restrictions, transfer type, section count and stop sequence and inspection expectations. LCSMT can review whether an actual SAMTRONIK SMA-2A configuration is a practical match.
SMA-2A sources and acceptance checks
Choose the board-width and length envelope together with the actual stopping sequence. The source header contains a contradictory 100 cm conveying-length entry for SMA-2A070L; use the model table and offered drawing instead.
SAMTRONIK exact-model or identified family product reference