Home / Taped radial-component presentation / Southern Machinery RTF-1001
Model guide · unit evidence required
OverviewSouthern Machinery RTF-1001 Radial Component Tape Feeder
Present compatible taped radial through-hole components to a specified pickup position on an integrated mounting machine. Confirm the RTF-1001 tape, lead dimensions, cut length and pickup datum on the intended host. The similarly named RTF-2002 brochure is excluded; its dimensions, power and tape-pitch specifications do not establish RTF-1001 compatibility.
Manufacturer-published model data
Southern Machinery RTF-1001 Technical Specifications
| Feeder identity | RTF-1001 radial THT tape accessory |
|---|---|
| Reference width | 80 mm; request the complete installed envelope |
| Control reference | PLC and sensors; verify actual hardware and interface |
| Lead handling | Clamping before cutting; floating lead-length adjustment |
| Component qualification | Taped capacitors, LEDs, transistors and other compatible radial parts require a component trial |
Manufacturer model data · Important: model-level figures and features are conditional manufacturer information, not guarantees for a particular used Southern Machinery RTF-1001 unit.
Key Features
Configuration Must Be Verified
The actual Southern Machinery RTF-1001 quote should identify the tape guide, advance mechanism, clamp, cutter, pickup fixture, sensors, mounting and host communication.
Buyer decision guide
When Southern Machinery RTF-1001 Makes Sense — and When It May Not
Southern Machinery RTF-1001 selection should begin with production requirements and evidence, not with a model name alone.
Typical Applications
Typical Applications for Southern Machinery RTF-1001
Use RTF-1001 for the selected taped component after lead geometry, orientation, cutting and host-machine pickup have been qualified. Confirm the RTF-1001 tape, lead dimensions, cut length and pickup datum on the intended host. The similarly named RTF-2002 brochure is excluded; its dimensions, power and tape-pitch specifications do not establish RTF-1001 compatibility.
Before quotation
Three Southern Machinery RTF-1001 Buyer Questions
These questions keep the quotation scope connected to the buyer’s real SMT process.
1
Which tape pitch, lead geometry and cut length are qualified for RTF-1001?
Southern Machinery RTF-1001 buyers should confirm this with actual-machine evidence before quotation.
2
What mounting and communication match the exact receiving machine?
Southern Machinery RTF-1001 buyers should confirm this with actual-machine evidence before quotation.
3
Can the selected component demonstrate cutting, pickup and approved jam recovery?
Southern Machinery RTF-1001 buyers should confirm this with actual-machine evidence before quotation.
Running video confirmation
Southern Machinery RTF-1001 Running Video Review
Before shipment, review the relevant power-on, movement, operating state and visible condition for the specific offered unit.
This review page does not present a reference clip as proof of the actual machine. A reviewed unit-specific recording is required before it can be attached here.
- Power-on and visible operating-state confirmation
- tape advance, lead restraint, cutting, pickup, orientation and approved jam recovery
- Unit-specific condition evidence before export packing
Used-machine inspection
Inspection and Export Preparation for an Actual Southern Machinery RTF-1001
- Nameplate and configurationModel, serial, year, voltage and installed options.
- Machine configurationMechanical, transport, sensing, camera, software and motion condition relevant to the quoted Southern Machinery RTF-1001.
- Transport and softwareConveyor, sensors, program and line-interface evidence where applicable.
- Running and packing proofPower-on evidence, visible operation and export packing records.
Spare Parts
Southern Machinery RTF-1001 Spare Parts Scope
Request a unit-specific Southern Machinery RTF-1001 list for tape guides, advance parts, clamp parts, cutters, pickup fixture, sensors and controller parts. Availability is not claimed on this review page.
Quotation checklist
Provide RTF-1001 nameplate, component and tape drawings, lead-cut requirement, host-machine model and sample-trial criteria, required accessories and desired inspection evidence for the proposed Southern Machinery RTF-1001.
FAQ
Common questions for overseas buyers evaluating a Southern Machinery RTF-1001.
01Model
Can the RTF-2002 catalogue supply missing RTF-1001 parameters?
No. The distinct model code requires its own confirmed drawing and specifications. This RTF-1001 guide uses its product reference and identity photo only; it does not combine another model specification.
02Duty
Does an RTF-1001 feeder alone prove insertion or soldering capability?
No. It presents a qualified component to the receiving machine. Placement, insertion, lead forming and downstream soldering depend on the actual complete system and trial.
03Evidence
Does the RTF-1001 reference image prove current stock?
No. It is a supplier-published model reference. Availability, serial number, condition, location, price and the fitted configuration require separate evidence for the offered unit.
Export packing proof
Export Packing and Container Loading
The V3 scrolling proof gallery is retained. It describes LCSMT export preparation, not the condition of a particular Southern Machinery RTF-1001 unit.
Send Your Southern Machinery RTF-1001 Production Requirement
Share RTF-1001 nameplate, component and tape drawings, lead-cut requirement, host-machine model and sample-trial criteria and inspection expectations. LCSMT can review whether an actual Southern Machinery RTF-1001 configuration is a practical match.
RTF-1001 sources and acceptance checks
Confirm the RTF-1001 tape, lead dimensions, cut length and pickup datum on the intended host. The similarly named RTF-2002 brochure is excluded; its dimensions, power and tape-pitch specifications do not establish RTF-1001 compatibility.
Southern Machinery exact-model or identified family product reference