Home / AOI & SPI Systems / TRI TR7700 SIII DT
Model guide · unit evidence required
OverviewTRI TR7700 SIII DT Desktop 2D Automated Optical Inspection System
The TR7700 SIII DT is a manually loaded desktop 2D AOI platform for pre- and post-reflow inspection. It suits an inspection task that can be supported offline, rather than an assumed inline conveyor or 3D-height process. Qualify detection and false-call behavior with known good and defective boards from the intended assembly.
Manufacturer-published model data
TRI TR7700 SIII DT Technical Specifications
| Optics | 4 MP top camera, dynamic imaging and multi-phase RGB+white LED illumination. TRI lists no 3D technology for this model. |
|---|---|
| Factory resolution | 10 or 15 micrometres in the optical-system table. The separate speed table references 12.5 micrometres; obtain exact configured settings rather than inferring a throughput figure. |
| DT board envelope | Maximum 330 × 250 mm; manual board handling. |
| PCB and clearance | Thickness 3 mm and weight up to 3 kg; top clearance 25 mm, 48 mm optional; DT bottom clearance 100 mm and edge clearance 3 mm. |
| DT dimensions and weight | 860 × 1,100 × 1,350 mm (W × D × H), 340 kg in the published specification. |
| Long-board version | TR7700L SIII DT: 510 × 460 mm board, 50 mm bottom clearance; 980 × 1,345 × 1,490 mm and 385 kg. These values do not describe the pictured DT machine. |
Manufacturer model data · Important: model-level figures and features are conditional manufacturer information, not guarantees for a particular used TRI TR7700 SIII DT unit.
Key Features
Configuration Must Be Verified
The actual TRI TR7700 SIII DT quote should identify the DT or L-DT nameplate, camera, resolution, lighting, stage motion, calibration, inspection software, computer, voltage and visible condition.
Buyer decision guide
When TRI TR7700 SIII DT Makes Sense — and When It May Not
TRI TR7700 SIII DT selection should begin with production requirements and evidence, not with a model name alone.
Typical Applications
Typical Applications for TRI TR7700 SIII DT
TRI TR7700 SIII DT should be evaluated against the buyer’s board size and clearance, visible defect list, manual loading, inspection-program acceptance and operator review. The final application fit depends on the evidence for the specific unit.
Before quotation
Three TRI TR7700 SIII DT Buyer Questions
These questions keep the quotation scope connected to the buyer’s real SMT process.
1
Does the required board fit the DT envelope and top/bottom clearance?
TRI TR7700 SIII DT buyers should confirm this with actual-machine evidence before quotation.
2
Which camera, factory resolution, lighting, software and calibration are actually installed?
TRI TR7700 SIII DT buyers should confirm this with actual-machine evidence before quotation.
3
Can the supplier demonstrate defect detection and false-call results on labelled representative boards?
TRI TR7700 SIII DT buyers should confirm this with actual-machine evidence before quotation.
Running video confirmation
TRI TR7700 SIII DT Running Video Review
Before shipment, review the relevant power-on, movement, operating state and visible condition for the specific offered unit.
This review page does not present a reference clip as proof of the actual machine. A reviewed unit-specific recording is required before it can be attached here.
- Power-on and visible operating-state confirmation
- manual board loading, scan, defect review, calibration and repeatability trial
- Unit-specific condition evidence before export packing
Used-machine inspection
Inspection and Export Preparation for an Actual TRI TR7700 SIII DT
- Nameplate and configurationModel, serial, year, voltage and installed options.
- Machine configurationMechanical, transport, sensing, camera, software and motion condition relevant to the quoted TRI TR7700 SIII DT.
- Transport and softwareConveyor, sensors, program and line-interface evidence where applicable.
- Running and packing proofPower-on evidence, visible operation and export packing records.
Spare Parts
TRI TR7700 SIII DT Spare Parts Scope
Request a unit-specific TRI TR7700 SIII DT list for cameras, lighting, motion assemblies, board supports, computer hardware and maintenance items. Availability is not claimed on this review page.
Quotation checklist
Provide board envelope and clearance, defect acceptance set, optics and software scope, calibration, voltage and destination, required accessories and desired inspection evidence for the proposed TRI TR7700 SIII DT.
FAQ
Common questions for overseas buyers evaluating a TRI TR7700 SIII DT.
01Imaging
Is TR7700 SIII DT a 3D AOI system?
No. TRI identifies a top-camera optical system and lists 3D technology as not applicable. Require a different documented platform for a 3D-height requirement.
02Board version
Can the DT machine inspect a 510 × 460 mm PCB?
That envelope belongs to TR7700L SIII DT in TRI’s table. The pictured standard DT is specified at 330 × 250 mm.
03Acceptance
Does the camera resolution guarantee defect detection?
No. Inspect calibrated settings and run labelled boards through the actual program. Keep detection, false-call, repeatability and operator-review evidence.
Export packing proof
Export Packing and Container Loading
The V3 scrolling proof gallery is retained. It describes LCSMT export preparation, not the condition of a particular TRI TR7700 SIII DT unit.
Send Your TRI TR7700 SIII DT Production Requirement
Share board envelope and clearance, defect acceptance set, optics and software scope, calibration, voltage and destination and inspection expectations. LCSMT can review whether an actual TRI TR7700 SIII DT configuration is a practical match.