Home / Vanstron PCB Handling / Vanstron DL Bare-Board Destacker Family
Model guide · unit evidence required
OverviewVanstron DL Bare-Board Destacker Family
Separate a board from the bottom of a stack with separation cams and lower it onto transfer belts for the next station. This mechanism is intended for bare boards. Do not treat a magazine loader or top-pick vacuum loader as mechanically equivalent.
Manufacturer-published model data
Vanstron DL Bare-Board Destacker Family Technical Specifications
| Separation | Bottom-board cam separation is described. |
|---|---|
| Modes | Destack and bypass are described. |
| Reference thickness | Current DL-460 model table: 0.6-2.5 mm; broader generic tables differ. |
| Stack monitoring | Low-stack warning is described; offered stack height and board range must be confirmed. |
Manufacturer model data · Important: model-level figures and features are conditional manufacturer information, not guarantees for a particular used Vanstron DL Bare-Board Destacker Family unit.
Key Features
Configuration Must Be Verified
The actual Vanstron DL Bare-Board Destacker Family quote should identify the Challenge separation and the exact installed option list; Record the correct edition with identified representative boards.
Buyer decision guide
When Vanstron DL Bare-Board Destacker Family Makes Sense — and When It May Not
Vanstron DL Bare-Board Destacker Family selection should begin with production requirements and evidence, not with a model name alone.
Application qualification
Vanstron DL Bare-Board Destacker Family Acceptance Plan
Challenge separation
Trial the real board finish, thickness and warpage, including the low-stack condition. Check for double feeding, edge scuffing and damage to the board below the separated one.
Record the correct edition
Older brochures name DL-350 while the current page names DL-460. Keep the current nameplate and dimensioned drawing in the RFQ instead of combining their dimensions.
Typical Applications
Typical Applications for Vanstron DL Bare-Board Destacker Family
Separate a board from the bottom of a stack with separation cams and lower it onto transfer belts for the next station. This mechanism is intended for bare boards. Do not treat a magazine loader or top-pick vacuum loader as mechanically equivalent.
Before quotation
Three Vanstron DL Bare-Board Destacker Family Buyer Questions
These questions keep the quotation scope connected to the buyer’s real SMT process.
1
Which separation requirement must the proposed Vanstron DL Bare-Board Destacker Family demonstrate?
Vanstron DL Bare-Board Destacker Family buyers should confirm this with actual-machine evidence before quotation.
2
What is included in this Vanstron DL Bare-Board Destacker Family offer: challenge separation and the exact installed option list?
Vanstron DL Bare-Board Destacker Family buyers should confirm this with actual-machine evidence before quotation.
3
Can the Vanstron DL Bare-Board Destacker Family acceptance run document record the correct edition with identified representative boards?
Vanstron DL Bare-Board Destacker Family buyers should confirm this with actual-machine evidence before quotation.
Running video confirmation
Vanstron DL Bare-Board Destacker Family Running Video Review
Before shipment, review the relevant power-on, movement, operating state and visible condition for the specific offered unit.
This review page does not present a reference clip as proof of the actual machine. A reviewed unit-specific recording is required before it can be attached here.
- Power-on and visible operating-state confirmation
- Separate a board from the bottom of a stack with separation cams and lower it onto transfer belts for the next station.
- Unit-specific condition evidence before export packing
Used-machine inspection
Inspection and Export Preparation for an Actual Vanstron DL Bare-Board Destacker Family
- Nameplate and configurationModel, serial, year, voltage and installed options.
- Machine configurationMechanical, transport, sensing, camera, software and motion condition relevant to the quoted Vanstron DL Bare-Board Destacker Family.
- Transport and softwareConveyor, sensors, program and line-interface evidence where applicable.
- Running and packing proofPower-on evidence, visible operation and export packing records.
Spare Parts
Vanstron DL Bare-Board Destacker Family Spare Parts Scope
Request a unit-specific Vanstron DL Bare-Board Destacker Family list for transport belts or chains, sensors, rail adjustment, pushers or moving carriages as fitted, controller and wear items. Availability is not claimed on this review page.
Quotation checklist
Provide target assembly, process requirements, separation, installed configuration and destination, required accessories and desired inspection evidence for the proposed Vanstron DL Bare-Board Destacker Family.
FAQ
Common questions for overseas buyers evaluating a Vanstron DL Bare-Board Destacker Family.
01Application
Which production task suits Vanstron DL Bare-Board Destacker Family?
Separate a board from the bottom of a stack with separation cams and lower it onto transfer belts for the next station. This mechanism is intended for bare boards. Do not treat a magazine loader or top-pick vacuum loader as mechanically equivalent.
02Configuration
What should a buyer confirm for Vanstron DL Bare-Board Destacker Family?
Challenge separation and the exact installed option list. Request the exact nameplate and option list.
03Unit evidence
Does this Vanstron DL Bare-Board Destacker Family illustration prove stock?
The Vanstron DL Bare-Board Destacker Family illustration is model-reference imagery, not a dated stock photograph. Serial, location, condition, price and running evidence require separate confirmation.
Export packing proof
Export Packing and Container Loading
The V3 scrolling proof gallery is retained. It describes LCSMT export preparation, not the condition of a particular Vanstron DL Bare-Board Destacker Family unit.
Send Your Vanstron DL Bare-Board Destacker Family Production Requirement
Share target assembly, process requirements, separation, installed configuration and destination and inspection expectations. LCSMT can review whether an actual Vanstron DL Bare-Board Destacker Family configuration is a practical match.
Published sources and applicability
Current product family and configuration-specific table
Manufacturer-authored historical family context; edition differences retained
Read the related PCB handling acceptance guide
This mechanism is intended for bare boards. Do not treat a magazine loader or top-pick vacuum loader as mechanically equivalent.