Home / Vanstron PCB Handling / Vanstron RE-460
Model guide · unit evidence required
OverviewVanstron RE-460 AOI Reject Conveyor
Separate rejected PCBs after inspection while permitting accepted boards to continue along the defined downstream route. A reject mechanism needs a trustworthy result tied to each board. It cannot resolve an upstream identity mismatch by itself.
Manufacturer-published model data
Vanstron RE-460 Technical Specifications
| Reject capacity | Five NG boards in the published reference table. |
|---|---|
| Reject position | 300 mm position length is listed; confirm compatibility with the actual board. |
| Board envelope | Published reference maximum: 500 x 460 mm. |
| Clearance and load | Current table lists 50 mm above, 25 mm below and a 3 kg maximum board weight. |
Manufacturer model data · Important: model-level figures and features are conditional manufacturer information, not guarantees for a particular used Vanstron RE-460 unit.
Key Features
Configuration Must Be Verified
The actual Vanstron RE-460 quote should identify the Challenge the result sequence and the exact installed option list; Fill the reject rack with identified representative boards.
Buyer decision guide
When Vanstron RE-460 Makes Sense — and When It May Not
Vanstron RE-460 selection should begin with production requirements and evidence, not with a model name alone.
Application qualification
Vanstron RE-460 Acceptance Plan
Challenge the result sequence
Run a labelled OK/NG/OK pattern, then consecutive rejects. Record the physical destination of each board and the result consumed by the conveyor.
Fill the reject rack
Demonstrate full-capacity alarm, upstream backpressure and operator removal. After clearing the rack, verify the pending board resumes with its original result rather than a default OK state.
Typical Applications
Typical Applications for Vanstron RE-460
Separate rejected PCBs after inspection while permitting accepted boards to continue along the defined downstream route. A reject mechanism needs a trustworthy result tied to each board. It cannot resolve an upstream identity mismatch by itself.
Before quotation
Three Vanstron RE-460 Buyer Questions
These questions keep the quotation scope connected to the buyer’s real SMT process.
1
Which reject capacity requirement must the proposed Vanstron RE-460 demonstrate?
Vanstron RE-460 buyers should confirm this with actual-machine evidence before quotation.
2
What is included in this Vanstron RE-460 offer: challenge the result sequence and the exact installed option list?
Vanstron RE-460 buyers should confirm this with actual-machine evidence before quotation.
3
Can the Vanstron RE-460 acceptance run document fill the reject rack with identified representative boards?
Vanstron RE-460 buyers should confirm this with actual-machine evidence before quotation.
Running video confirmation
Vanstron RE-460 Running Video Review
Before shipment, review the relevant power-on, movement, operating state and visible condition for the specific offered unit.
This review page does not present a reference clip as proof of the actual machine. A reviewed unit-specific recording is required before it can be attached here.
- Power-on and visible operating-state confirmation
- Separate rejected PCBs after inspection while permitting accepted boards to continue along the defined downstream route.
- Unit-specific condition evidence before export packing
Used-machine inspection
Inspection and Export Preparation for an Actual Vanstron RE-460
- Nameplate and configurationModel, serial, year, voltage and installed options.
- Machine configurationMechanical, transport, sensing, camera, software and motion condition relevant to the quoted Vanstron RE-460.
- Transport and softwareConveyor, sensors, program and line-interface evidence where applicable.
- Running and packing proofPower-on evidence, visible operation and export packing records.
Spare Parts
Vanstron RE-460 Spare Parts Scope
Request a unit-specific Vanstron RE-460 list for transport belts or chains, sensors, rail adjustment, pushers or moving carriages as fitted, controller and wear items. Availability is not claimed on this review page.
Quotation checklist
Provide target assembly, process requirements, reject capacity, installed configuration and destination, required accessories and desired inspection evidence for the proposed Vanstron RE-460.
FAQ
Common questions for overseas buyers evaluating a Vanstron RE-460.
01Application
Which production task suits Vanstron RE-460?
Separate rejected PCBs after inspection while permitting accepted boards to continue along the defined downstream route. A reject mechanism needs a trustworthy result tied to each board. It cannot resolve an upstream identity mismatch by itself.
02Configuration
What should a buyer confirm for Vanstron RE-460?
Challenge the result sequence and the exact installed option list. Request the exact nameplate and option list.
03Unit evidence
Does this Vanstron RE-460 illustration prove stock?
The Vanstron RE-460 illustration is model-reference imagery, not a dated stock photograph. Serial, location, condition, price and running evidence require separate confirmation.
Export packing proof
Export Packing and Container Loading
The V3 scrolling proof gallery is retained. It describes LCSMT export preparation, not the condition of a particular Vanstron RE-460 unit.
Send Your Vanstron RE-460 Production Requirement
Share target assembly, process requirements, reject capacity, installed configuration and destination and inspection expectations. LCSMT can review whether an actual Vanstron RE-460 configuration is a practical match.
Published sources and applicability
Current product family and configuration-specific table
Manufacturer-authored historical family context; edition differences retained
Read the related PCB handling acceptance guide
A reject mechanism needs a trustworthy result tied to each board. It cannot resolve an upstream identity mismatch by itself.