SMT equipment sourcing · inspection · packing · global delivery

Home / Equipment category / Mycronic MYT50
Overview

Mycronic MYT50 Tabletop Dispensing Robot

Mycronic positions the MYT50 as a configurable tabletop dispenser for development and batch production. Check fixture repeatability and material control before scaling a bench process.

Official source recordedUnit evidence requiredInspection guideExport support
Manufacturer-published model data

Mycronic MYT50 Technical Specifications

CalibrationMycronic describes automated calibration, visual inspection and fiducial scanning.
Height compensationThe MYT50 page describes Z-axis laser height compensation.

Manufacturer model information

Model data describes the published configuration. Confirm fitted options, utilities and condition for the unit offered.

Key Features

Configuration Must Be Verified

Mycronic describes laser height compensation and vision-assisted setup. Verify the installed valve, fixture, calibration tooling and sensing on the MYT50 quote. The way the board is loaded onto the fixture is part of the process definition.

Buyer decision guide

When Mycronic MYT50 Makes Sense — and When It May Not

Use the tallest assembly and the lowest target as fixture checks. Leave clearance for the installed valve and the actual loading sequence.

Good application fitUse a bench trial when the programme or material is still being developed and a technician needs direct access to the fixture. Verify that another operator can load the board with the same result.
Where to check the limitsFor continuous upstream and downstream flow, budget the transfer, staging and clamping outside the robot cycle. Manual loading can become the largest difference from an inline offer.

Mycronic MYT50 Acceptance Plan

Measure deposit consistency after unloading and reloading the fixture. Confirm that height compensation follows the intended surface.

  1. Set the fixture reference

    Use the actual board stops and supports. Teach the reference with a loaded board, then reload it and check what changed before changing the programme.

  2. Challenge the height measurement

    Record reference surfaces and compare the path across a populated area. Check that the installed tool clears tall features when moving between deposits.

  3. Measure a second operator's batch

    Use the same material and work instruction. Compare the first board after loading, a stable run and a restart, keeping the deposit measurements with the programme revision.

Typical Applications

Typical Applications for Mycronic MYT50

Use the system for a development lot with adhesive dots or short seal paths where board-to-board height varies. Mark the lowest and highest working surfaces on the sample.

For recurring small batches, compare two fixtures or operators using the same recipe. If the work shifts after reloading, separate part registration from the valve or material settings.

Before quotation

Three Mycronic MYT50 Buyer Questions

1

What must the process handle?

Send the drawing, sample or material that defines the hardest job. Review the calibration with that sample in view.

2

Which configuration is on offer?

Require the data plate and a configuration list with included items and separately priced options. Mark the setup used in the trial.

3

How will acceptance be measured?

Agree the result to keep from the trial and how it will be checked after transport. Include unresolved process limits on the order.

Running video confirmation

Mycronic MYT50 Running Video Review

Show the installed valve and fixture, the height reference on the actual board and the deposits after an unload and reload. Keep the measurement or microscope view tied to that same board.

Request a dated recording tied to the offered machine's serial and tested sample. The preview opens the evidence request.

Mycronic MYT50 complete-machine preview for running-evidence requestRequest running video →Actual-unit recording on request
Used-machine inspection

Inspection and Export Preparation for an Actual Mycronic MYT50

  • Unit identityMatch the nameplate, electrical label and fitted options to the quotation. Keep any condition notes and missing accessories with that serial.
  • Inspection and maintenanceAfter valve or fixture service, re-establish the offset with the approved reference and repeat the loading check.
  • Acceptance recordCapture the tool and fixture identifiers, fiducial and height reference and the actual dispense programme. Ask for a short fixture-change demonstration when buying for multiple board designs.
  • Export handoffAgree the transport state and the commissioning check. Request dated packing records for the actual unit before dispatch.
Spare Parts

Mycronic MYT50 Spare Parts Scope

Request the fitted nozzle, seals, material-delivery items, calibration reference and a spare fixture or locator set where useful. Check compatibility with the particular valve generation and material.

Quotation checklist

Provide your application, sample details, destination utilities and required delivery scope. Ask the supplier to itemise configuration, service parts, installation and the evidence included with the offer.

Compare bench dispensing with inline transfer

MYD50 adds configurable conveyor handling. Choose based on what the sample process needs from loading and registration. Time staging and removal on a bench setup when comparing completed boards per hour.

Mycronic MYD50 →

FAQ

Common questions for overseas buyers evaluating a Mycronic MYT50.

01Configuration

Why does the source URL mention MYT102?

The current manufacturer's page identifies the MYT50. Quote and verify the model on the equipment nameplate.

02Selection

Does laser compensation replace a repeatable fixture?

Fixture loading still controls location and the angle of the board. Check lateral reference and height on separate reloads.

03Acceptance

Can one recipe transfer to a new valve?

Retain the position programme and requalify the material output after changing the valve, nozzle or feed system.

Export packing proof

Export Packing and Container Loading

Pack the bench fixture and material hardware with separate identifiers. Before transport, document how the approved tool, offsets and recipe will be reinstated without relying on a single operator.

These photos show general export preparation. Request dated protection and loading photos for the specific unit before dispatch.

Crated equipment at a container door
Crated equipment at a container door
Secured cargo inside a container
Secured cargo inside a container
Wrapped machines in a staging area
Wrapped machines in a staging area
Crated equipment at a container door
Crated equipment at a container door
Secured cargo inside a container
Secured cargo inside a container
Wrapped machines in a staging area
Wrapped machines in a staging area

Send Your Mycronic MYT50 Production Requirement

Share the process, representative job and required evidence. Ask for the fitted configuration and a quotation that distinguishes the machine, tooling, services and delivery.