ASMPT / SIPLACE / SMT spare parts
SIPLACE X 00141390-01 feeder
The supplier lists 00141390-01 as an ASM / Siemens SIPLACE X 8 mm SmartFeeder with a splice sensor. Confirm the complete offered label and supported machine configuration. This reference does not establish firmware, condition or current availability.
Selected part reference
00141390-01
Confirm the offered item's maker, part code, condition, availability and machine fit before ordering.
00141390-01
- Model
- 00141390-01
- Part code
- 00141390-01
- Fit
- Confirm by unit
01 / Select precisely
Part details
Check the complete part number and the details needed to match your machine.
| Model | Part number | Compatibility | Details and checks |
|---|---|---|---|
| 00141390-01 | 00141390-01 | Listed reference; confirm the full actual identity and applicable machine documents. |
|
02 / Check before ordering
Match the installed part
Check the installed code and machine configuration. Similar appearance or a shared series name does not establish interchangeability.
- Keep the full 00141390-01 identity and actual splice-sensor configuration in the RFQ.
- Resolve the required tape application and machine configuration using the applicable documents.
- Distinguish this reference from separately listed 00141270, 00141290 and 00141370 assemblies.
- Agree supplied accessories, actual-item assessment, firmware evidence where relevant and return conditions.
03 / Make a useful decision
Selection and replacement advice
Use the full 00141390-01 reference rather than ordering from the words X feeder or 8 mm alone. The original plan lists 00141270, 00141290, 00141370 and 00141390 together; a grouped listing does not make those assemblies interchangeable. Preserve the suffix and the actual sensor configuration when checking a proposed replacement. Compare feeders by the documented tape and component application, machine interface, supported configuration and agreed acceptance evidence. A bare unit, a unit with accessories and a serviced unit may cover different scopes. Ask for actual label and interface photographs and a written description of what is supplied. A splice-sensor description does not by itself establish a particular firmware version or compatibility with every X or TX installation.
04 / Care and handling
Maintenance and handling guidance
Keep the feeder identity and observed tape-handling or sensor symptom together. Do not erase the original complaint by assuming every feed error requires the same replacement.
Use the applicable feeder and machine maintenance instructions. No universal sensor adjustment, lubrication point, tape pitch or calibration value is specified here.
Before you ask
Questions about this part
Are the other 8 mm codes in the original grouped listing interchangeable?
The grouped listing supplies no replacement approval. Match the full actual code, sensor configuration and applicable machine documentation.
Keep the part in context
Request a quote for this part
Choose the complete part number and quantity. Continue to our contact form with these details; your inquiry is sent only when you submit that form.