FUJI / SMT spare parts
Fuji CP6 8 mm feeders
The supplier describes CP6 / CP642 / CP643 feeders with 8x2 mm and 8x4 mm wording. Confirm width, pitch and the actual feeder designation separately.
Selected part reference
CP6
Confirm the offered item's maker, part code, condition, availability and machine fit before ordering.
CP6
- Model
- CP6
- Part code
- CP6
- Fit
- Confirm by unit
01 / Select precisely
Part details
Check the complete part number and the details needed to match your machine.
| Model | Part number | Compatibility | Details and checks |
|---|---|---|---|
| CP6 | CP6 | Catalogue reference. Exact offered assembly, machine interface and revision require confirmation. |
|
Application and identification
Use and ordering context
The CP6 supplier entry combines an 8 mm width with two feed-format descriptions. That is enough to frame the enquiry, but not to assign a particular configuration to the photographed feeder. Keep the required pitch distinct from width and ask for the actual assembly designation. The CP6, CP642 and CP643 wording is retained as supplier application text rather than proof that every feeder is accepted by all three.
02 / Check before ordering
Match the installed part
Check the installed code and machine configuration. Similar appearance or a shared series name does not establish interchangeability.
- State the required tape width and pitch in different RFQ fields, supported by the actual component and setup requirement.
- Request the installed and offered assembly labels to resolve which CP6-family reference is involved.
- Ask whether any claimed pitch change needs different parts or a particular setup procedure; no conversion is assumed.
03 / Make a useful decision
Selection and replacement advice
Compare an 8x2 requirement with an 8x4 requirement using the component tape and applicable setup record. A shared 8 mm width does not resolve the feed increment or the chosen assembly. If the seller proposes an adjustable alternative, ask for the documented setup and machine interface instead of assuming adjustability from the photograph. Specify complete-feeder and loose repair-piece scopes separately, including any reel or take-up items being offered.
04 / Care and handling
Maintenance and handling guidance
Keep the feeder identity associated with the tested tape configuration when it goes for maintenance.
After authorised work, request observations against the required feed setup rather than a generic feeds-correctly statement.
Follow the applicable Fuji feeder instructions for adjustments and wear checks; no service values or conversion procedure are supplied here.
Before you ask
Questions about this part
Does 8 mm mean 2 mm pitch?
No. Width and pitch are distinct. The supplier heading includes both 8x2 and 8x4 descriptions.
Which pitch is shown in the photograph?
The retained image does not establish its selected configuration. Obtain the actual assembly and setup evidence.
Can one feeder be converted between both formats?
No conversion capability is certified. Ask for the exact feeder documentation and required parts, if any.
Keep the part in context
Request a quote for this part
Choose the complete part number and quantity. Continue to our contact form with these details; your inquiry is sent only when you submit that form.