JUKI / SMT spare parts
JUKI AN05HP mechanical feeder
The supplier pairs AN05HP with E1005706AB0 and describes an 8 x 2 mm feeder. Confirm the installed interface and terminology before ordering.
Selected part reference
E1005706AB0
Source-listed reference. Exact fit, condition and availability require confirmation.
AN05HP / source-listed ATF
- Model
- AN05HP / source-listed ATF
- Part code
- E1005706AB0
- Fit
- Confirm by unit
Photographs are bound to the selected part number. Reference images do not establish current inventory or interchangeability.
01 / Select precisely
Compare the family variants
Compare the complete part numbers, revisions and documented specifications. Similar appearance does not establish interchangeability.
| Variant | Part number | Compatibility | Specifications |
|---|---|---|---|
| AN05HP / source-listed ATF | E1005706AB0 | Supplier-described JUKI feeder. Its page uses ATF in the title and places AN05HP in an AF mechanical-feeder list; resolve the naming against the installed item. |
|
Understand this reference
Application and identification
This reference comes from a supplier page headed Juki ATF 8x2mm Feeder AN05HP E1005706AB0. Its catalogue table also places AN05HP beside AF05HP under an AF mechanical-feeder heading. That naming difference is visible source evidence to resolve, not a reason to silently rename the installed feeder. The reference photograph shows a mechanical feeder assembly; it does not prove the condition, feed accuracy or machine compatibility of a delivered item.
02 / Check before ordering
Match the installed part
The family page groups related variants; it does not imply that variants are interchangeable.
- Retain AN05HP and E1005706AB0 together; ask why the supplier uses both ATF and AF wording.
- Provide the actual tape width/pitch requirement, machine model and feeder-interface photographs; do not infer the interface from width alone.
- Request the supplied assembly's markings, included reel-support items, declared condition and agreed functional evidence.
03 / Make a useful decision
Selection and replacement advice
Start with the complete installed identification, the tape requirement and the machine interface. An electric feeder listing and a mechanical feeder listing should not be compared as equivalent merely because both say 8 mm. Ask which indexing and machine-interface requirements each option satisfies and what supporting documentation is available. Where the supplier proposes an AF/ATF naming cross-reference or a replacement assembly code, request the written basis rather than approving it from a catalogue heading. Define a relevant feeding acceptance check with the actual production team before buying a used unit.
04 / Care and handling
Maintenance and handling guidance
Record feeder identity and the observed symptom before cleaning or service. Keep the tape/reel context with the history so a later comparison does not confuse a feeder fault with a different supplied-material or setup condition.
Use the applicable JUKI feeder procedure for inspection, lubrication and adjustment. The retained catalogue supplies no approved grease, adjustment value, calibration tolerance or service interval, and this page does not invent them.
04 / Trace every claim
Sources, photos and condition
- Juki ATF 8x2mm Feeder AN05HP E1005706AB0 · Supplier catalogue identification and application claims, not OEM authentication, installed fit or LCSMT stock.
Stock, authenticity, condition, test results and interchangeability require separate evidence. A family photograph cannot prove them.
05 / Before you ask
Questions about this family
What establishes the ordering identity?
The source-listed codes and distinctions are retained above. Require the applicable machine documents and readable offered-item labels to resolve revisions and installed fit.
Does the photograph prove stock, condition or authenticity?
No. The photograph is a catalogue reference, with any visible limitations disclosed. Ask for evidence of the actual item, its declared maker and condition, and the agreed inspection scope.
Can another variant be substituted?
No substitution approval is given. The required application, interfaces, revision and acceptance basis must be established for the actual machine before an alternative is accepted.
06 / Keep the variant in context
Prepare a precise inquiry
Choose the complete part number and quantity, then open our inquiry form. Machine model, revision and installation evidence remain essential for matching.