SMT equipment sourcing · inspection · packing · global delivery

Home / Equipment category / QUICK ET8J493SF
Overview

QUICK ET8J493SF Servo Tabletop Dispenser

The ET8J493SF is QUICK's three-axis servo tabletop model. It suits programs that need controlled XYZ moves and can reach the feature without rotating the fixture.

Official source recordedUnit evidence requiredInspection guideExport support
Manufacturer-published model data

QUICK ET8J493SF Technical Specifications

Travel400 × 400 × 100 mm XYZ.
LoadQUICK lists 8 kg on the platform and 5 kg on the Z head.
MotionThe table lists ±0.01 mm repeat positioning and up to 800 mm/s on XY.
Z motionQUICK lists a 0.1–300 mm/s Z speed range.
Bench footprintThe table lists 800 × 750 × 655 mm without the monitor bracket and a mass of 67 kg.

Manufacturer model information

Model data describes the published configuration. Confirm fitted options, utilities and condition for the unit offered.

Key Features

Configuration Must Be Verified

The ET8J493SF is a three-axis servo platform. Check the actual valve, mount, fixture and controller before applying the published travel, load and repeat-positioning figures.

Buyer decision guide

When QUICK ET8J493SF Makes Sense — and When It May Not

Weigh the fixture and the complete head separately. Check reach at the board corners with the hose and cable routing installed.

Good application fitUse the XYZ system for a reachable flat or stepped path with a fixed tooling orientation. Evaluate motion together with material shutoff when the bead crosses a corner or a narrow gap.
Where to check the limitsWhere part geometry requires a change in orientation, establish whether the fixture can present the feature at a fixed angle. If it cannot, compare a rotary or other tooling arrangement on the actual part.

QUICK ET8J493SF Acceptance Plan

Evaluate dispensing at the intended production speed. Inspect line starts, corners and stops where valve timing can change the result.

  1. Calculate the loads separately

    Weigh the full fixture and the moving head with its mounts. Include routing of the hoses and cables when checking the available envelope.

  2. Match speed to deposition

    Test the fast and slow path segments on the same material. Measure the deposit where the motion decelerates and where the valve starts or closes.

  3. Prove restart repeatability

    Pause for the normal production interval and check the first feature after restart. If a calibration reference or purge is needed, document it in the acceptance procedure.

Typical Applications

Typical Applications for QUICK ET8J493SF

Compare repeated dots on a planar panel, or a short adhesive bead interrupted by keep-out regions. Include the fastest segment and the tightest corner in the sample.

When replacing a bench unit, test the existing fixture and valve envelope before moving production recipes. File compatibility and coordinates must be confirmed on the proposed controller.

Before quotation

Three QUICK ET8J493SF Buyer Questions

1

What must the process handle?

Send the drawing, sample or material that defines the hardest job. Review the travel with that sample in view.

2

Which configuration is on offer?

Require the data plate and a configuration list with included items and separately priced options. Mark the setup used in the trial.

3

How will acceptance be measured?

Agree the result to keep from the trial and how it will be checked after transport. Include unresolved process limits on the order.

Running video confirmation

QUICK ET8J493SF Running Video Review

Show the fitted servo platform following a real part path, with the tight corner and restart in view. Follow it with a measurable bead or dot result and the actual fixture identifiers.

Request a dated recording tied to the offered machine's serial and tested sample. The preview opens the evidence request.

QUICK ET8J493SF complete-machine preview for running-evidence requestRequest running video →Actual-unit recording on request
Used-machine inspection

Inspection and Export Preparation for an Actual QUICK ET8J493SF

  • Unit identityMatch the nameplate, electrical label and fitted options to the quotation. Keep any condition notes and missing accessories with that serial.
  • Inspection and maintenanceInspect screw and guide condition under the manufacturer procedure, then repeat the positioning reference and a dispense sample.
  • Acceptance recordAsk for the servo/controller identity, installed tool mass, fixture dimensions and recipe backup. Retain a result showing that the sold configuration can run the programme without collision.
  • Export handoffAgree the transport state and the commissioning check. Request dated packing records for the actual unit before dispatch.
Spare Parts

QUICK ET8J493SF Spare Parts Scope

Price valve consumables and nozzles separately from compatible servo or screw/guide service items. Confirm the controller version and part codes before accepting any proposed replacement.

Quotation checklist

Provide your application, sample details, destination utilities and required delivery scope. Ask the supplier to itemise configuration, service parts, installation and the evidence included with the offer.

Compare a servo XYZ path with rotary dispensing

ET8484 offers a rotary axis and a different moving-head allowance. ET8J493SF can suit a fixed orientation. Compare the material result on the same path and the tool loads, rather than ranking from the published XY speed.

QUICK ET8484 →

FAQ

Common questions for overseas buyers evaluating a QUICK ET8J493SF.

01Configuration

How does this differ from ET8484?

QUICK lists three axes for this model and four for ET8484. Compare Z head load and whether rotation is needed.

02Selection

Does the 800 mm/s figure apply at every feature?

It is a published upper XY speed. Use the intended bead shape, acceleration and valve response to establish process speed on the board.

03Acceptance

Can the repeat-positioning figure be used as deposit tolerance?

Measure the deposited material on the actual part. Tool offset, timing and the fluid process influence the result beyond the positioning reference.

Export packing proof

Export Packing and Container Loading

Protect the motion assembly and pack the fixture, HMI accessories and loose tool items under their identifiers. Keep the calibration and first-run checklist with the setup records.

These photos show general export preparation. Request dated protection and loading photos for the specific unit before dispatch.

Crated equipment at a container door
Crated equipment at a container door
Secured cargo inside a container
Secured cargo inside a container
Wrapped machines in a staging area
Wrapped machines in a staging area
Crated equipment at a container door
Crated equipment at a container door
Secured cargo inside a container
Secured cargo inside a container
Wrapped machines in a staging area
Wrapped machines in a staging area

Send Your QUICK ET8J493SF Production Requirement

Share the process, representative job and required evidence. Ask for the fitted configuration and a quotation that distinguishes the machine, tooling, services and delivery.