Home / Vanstron PCB Handling / Vanstron TRA-460
Model guide · unit evidence required
OverviewVanstron TRA-460 PCB Flipper Conveyor
Turn a PCB through 180 degrees for a second-side process while keeping the incoming and outgoing board transfer controlled. Check both populated sides and the clamping path. A horizontal turning conveyor changes the in-plane orientation and cannot replace this inversion step.
Manufacturer-published model data
Vanstron TRA-460 Technical Specifications
| Board envelope | Published TRA-460 maximum: 500 x 460 mm. |
|---|---|
| Component clearance | Manufacturer reference: 50 mm above and 50 mm below. |
| Inversion cycle | About 5-8 seconds in the model table; line throughput also includes handoffs. |
| Edge support | 4 mm in the current product table. |
Manufacturer model data · Important: model-level figures and features are conditional manufacturer information, not guarantees for a particular used Vanstron TRA-460 unit.
Key Features
Configuration Must Be Verified
The actual Vanstron TRA-460 quote should identify the Clamp without contact and the exact installed option list; Keep orientation explicit with identified representative boards.
Buyer decision guide
When Vanstron TRA-460 Makes Sense — and When It May Not
Vanstron TRA-460 selection should begin with production requirements and evidence, not with a model name alone.
Application qualification
Vanstron TRA-460 Acceptance Plan
Clamp without contact
Use the tallest components on both sides to inspect the swept clearance and every clamp contact. Check a thin and a warped sample for slip before accelerating the flip.
Keep orientation explicit
Mark the leading edge and top side before entry. Photograph the exit orientation, then repeat after bypass and a controlled stop to verify the selected operating sequence.
Typical Applications
Typical Applications for Vanstron TRA-460
Turn a PCB through 180 degrees for a second-side process while keeping the incoming and outgoing board transfer controlled. Check both populated sides and the clamping path. A horizontal turning conveyor changes the in-plane orientation and cannot replace this inversion step.
Before quotation
Three Vanstron TRA-460 Buyer Questions
These questions keep the quotation scope connected to the buyer’s real SMT process.
1
Which board envelope requirement must the proposed Vanstron TRA-460 demonstrate?
Vanstron TRA-460 buyers should confirm this with actual-machine evidence before quotation.
2
What is included in this Vanstron TRA-460 offer: clamp without contact and the exact installed option list?
Vanstron TRA-460 buyers should confirm this with actual-machine evidence before quotation.
3
Can the Vanstron TRA-460 acceptance run document keep orientation explicit with identified representative boards?
Vanstron TRA-460 buyers should confirm this with actual-machine evidence before quotation.
Running video confirmation
Vanstron TRA-460 Running Video Review
Before shipment, review the relevant power-on, movement, operating state and visible condition for the specific offered unit.
This review page does not present a reference clip as proof of the actual machine. A reviewed unit-specific recording is required before it can be attached here.
- Power-on and visible operating-state confirmation
- Turn a PCB through 180 degrees for a second-side process while keeping the incoming and outgoing board transfer controlled.
- Unit-specific condition evidence before export packing
Used-machine inspection
Inspection and Export Preparation for an Actual Vanstron TRA-460
- Nameplate and configurationModel, serial, year, voltage and installed options.
- Machine configurationMechanical, transport, sensing, camera, software and motion condition relevant to the quoted Vanstron TRA-460.
- Transport and softwareConveyor, sensors, program and line-interface evidence where applicable.
- Running and packing proofPower-on evidence, visible operation and export packing records.
Spare Parts
Vanstron TRA-460 Spare Parts Scope
Request a unit-specific Vanstron TRA-460 list for transport belts or chains, sensors, rail adjustment, pushers or moving carriages as fitted, controller and wear items. Availability is not claimed on this review page.
Quotation checklist
Provide target assembly, process requirements, board envelope, installed configuration and destination, required accessories and desired inspection evidence for the proposed Vanstron TRA-460.
FAQ
Common questions for overseas buyers evaluating a Vanstron TRA-460.
01Application
Which production task suits Vanstron TRA-460?
Turn a PCB through 180 degrees for a second-side process while keeping the incoming and outgoing board transfer controlled. Check both populated sides and the clamping path. A horizontal turning conveyor changes the in-plane orientation and cannot replace this inversion step.
02Configuration
What should a buyer confirm for Vanstron TRA-460?
Clamp without contact and the exact installed option list. Request the exact nameplate and option list.
03Unit evidence
Does this Vanstron TRA-460 illustration prove stock?
The Vanstron TRA-460 illustration is model-reference imagery, not a dated stock photograph. Serial, location, condition, price and running evidence require separate confirmation.
Export packing proof
Export Packing and Container Loading
The V3 scrolling proof gallery is retained. It describes LCSMT export preparation, not the condition of a particular Vanstron TRA-460 unit.
Send Your Vanstron TRA-460 Production Requirement
Share target assembly, process requirements, board envelope, installed configuration and destination and inspection expectations. LCSMT can review whether an actual Vanstron TRA-460 configuration is a practical match.
Published sources and applicability
Current product family and configuration-specific table
Manufacturer-authored historical family context; edition differences retained
Read the related PCB handling acceptance guide
Check both populated sides and the clamping path. A horizontal turning conveyor changes the in-plane orientation and cannot replace this inversion step.