Ten-nozzle head configuration
YSM10 HM
- Rate
- 46,000 CPH under manufacturer optimum conditions
- Boundary
- Verify head, recognition equipment and accessories
Home / Yamaha Equipment / Yamaha YSM10
Model guide · unit evidence required
OverviewYamaha YSM10 Compact Modular Mounter
Yamaha YSM10 is a compact one-beam placement platform that brought the YS12 line into one model. Yamaha now marks it as discontinued; this guide supports configuration-correct used-equipment enquiries rather than asserting new factory availability. Consider YSM10 when compact placement and component versatility fit the line. Its catalogue rate is not the completed assembly rate; discontinued status makes feeder, software and support verification particularly important.
One family · configuration choices
Compare YSM10 versions
Pick components from the fitted feeder or optional tray system, recognize them and place them on the supported PCB. Match the HM or HM5 head and recognition hardware to the bill of materials before estimating line output. Select by the actual board envelope, optical configuration and installation space—not the suffix alone.
Five-nozzle head configuration
YSM10 HM5
- Rate
- 31,000 CPH under manufacturer optimum conditions
- Boundary
- One YSM10 platform, not another production page
What the versions share
- Process
- Compact Modular Mounter
- Purchase boundary
- Identify the version, installed options and application trial; no stock is asserted.
Current manufacturer model descriptions checked 5 October 2026; numbers remain version-specific. Figures describe standard model configurations, not stock or an offered unit. Dimensions are listed in the source order and exclude the tower light where stated. The representative YSM10 image is not proof of another version or an offered unit’s condition. Request nameplate, configuration and board-trial evidence before selection.
Manufacturer-published model data
Yamaha YSM10 Technical Specifications
| Standard pcb envelope | 50 × 50 to 510 × 460 mm; up to 950 mm length is optional |
|---|---|
| Optimum mounting rate | 46,000 CPH with ten-nozzle HM; 31,000 CPH with five-nozzle HM5, under Yamaha conditions |
| Published component range | 03015 metric to W55 × L100 mm, height up to 15 mm, subject to recognition options |
| Recognition option boundary | Multi-camera required above 6.5 mm height or 12 mm part size; width above 45 mm uses divided recognition |
| Fixed-plate feeder capacity | Up to 96 types in 8 mm tape equivalents; confirm carriage configuration |
| External dimensions / mass | 1,254 × 1,440 × 1,445 mm; approximately 1,270 kg |
Manufacturer model data · Important: model-level figures and features are conditional manufacturer information, not guarantees for a particular used Yamaha YSM10 unit.
Key Features
Configuration Must Be Verified
The offer must identify YSM10 nameplate, HM/HM5 head, feeder bank, nozzle station, multi-camera, tray equipment and board transport; Actual BOM trial, pickup errors, placement verification, populated-board transfer, changeover and program recovery.
Buyer decision guide
When Yamaha YSM10 Makes Sense — and When It May Not
Yamaha YSM10 selection should begin with production requirements and evidence, not with a model name alone.
Application qualification
Yamaha YSM10 Acceptance Plan
Choose the head from the bill of materials
For a YSM10 enquiry, separate the many small tape-fed parts from large, tall or tray-fed packages. Ask whether the offered machine uses the ten-nozzle HM or five-nozzle HM5 arrangement. Keep the manufacturer optimum rates beside their head names rather than advertising one rate for every unit. Have the supplier identify the camera and nozzles used for each difficult part, then retain a full board trial including replenishment, pickup errors and rejected components.
Check optional recognition and transport
A YSM10 photograph cannot establish the installed multi-camera, automatic nozzle station or tray system. The published range has recognition boundaries for tall and large parts, including divided recognition for particularly wide packages. Send component drawings and a populated-board envelope with underside clearances. Request software and hardware identification for the actual serial and demonstrate the proposed program. A long-board catalogue option is not proof that the offered conveyor and supports can carry a 950 mm assembly.
Plan service before accepting a discontinued unit
Yamaha marks the YSM10 as discontinued on its current product page. Request the installed software, licenses, feeder compatibility, service history and recoverable backup before ordering a used system. During a supervised test, include an agreed changeover and restart using authorized procedures; record which accessories and support tools will be delivered. Two Shenzhen listings establish enquiry channels only. Neither their inventory statements nor a clean brochure illustration proves current stock, refurbishment, warranty or the condition of an offered unit.
Typical Applications
Typical Applications for Yamaha YSM10
Yamaha YSM10 should be evaluated against the buyer’s pick components from the fitted feeder or optional tray system, recognize them and place them on the supported pcb. match the hm or hm5 head and recognition hardware to the bill of materials before estimating line output. The final application fit depends on the evidence for the specific unit.
Before quotation
Three Yamaha YSM10 Buyer Questions
These questions keep the quotation scope connected to the buyer’s real SMT process.
1
Which standard pcb envelope requirement must the proposed Yamaha YSM10 demonstrate?
Yamaha YSM10 buyers should confirm this with actual-machine evidence before quotation.
2
What is included in this Yamaha YSM10 offer: ysm10 nameplate, hm/hm5 head, feeder bank, nozzle station, multi-camera, tray equipment and board transport?
Yamaha YSM10 buyers should confirm this with actual-machine evidence before quotation.
3
Can the Yamaha YSM10 acceptance run document actual bom trial, pickup errors, placement verification, populated-board transfer, changeover and program recovery?
Yamaha YSM10 buyers should confirm this with actual-machine evidence before quotation.
Running video confirmation
Yamaha YSM10 Running Video Review
Before shipment, review the relevant power-on, movement, operating state and visible condition for the specific offered unit.
Request a dated operating sequence of the offered Yamaha YSM10. The model-image control requests evidence, not playback of a recorded video.
- Power-on and visible operating-state confirmation
- Pick components from the fitted feeder or optional tray system, recognize them and place them on the supported PCB. Match the HM or HM5 head and recognition hardware to the bill of materials before estimating line output.
- Unit-specific condition evidence before export packing
Used-machine inspection
Inspection and Export Preparation for an Actual Yamaha YSM10
- Nameplate and configurationModel, serial, year, voltage and installed options.
- Machine configurationMechanical, transport, sensing, camera, software and motion condition relevant to the quoted Yamaha YSM10.
- Transport and softwareConveyor, sensors, program and line-interface evidence where applicable.
- Running and packing proofPower-on evidence, visible operation and export packing records.
Spare Parts
Yamaha YSM10 Spare Parts Scope
Request a unit-specific Yamaha YSM10 list for model-compatible feeders, nozzle and filter service items, board supports, recognition calibration fixtures and licensed program backups. Availability is not claimed on this review page.
Quotation checklist
Provide target assembly, process requirements, standard pcb envelope, installed configuration and destination, required accessories and desired inspection evidence for the proposed Yamaha YSM10.
FAQ
Common questions for overseas buyers evaluating a Yamaha YSM10.
01Application
Which production task suits Yamaha YSM10?
Pick components from the fitted feeder or optional tray system, recognize them and place them on the supported PCB. Match the HM or HM5 head and recognition hardware to the bill of materials before estimating line output. Consider YSM10 when compact placement and component versatility fit the line. Its catalogue rate is not the completed assembly rate; discontinued status makes feeder, software and support verification particularly important.
02Configuration
What should a buyer confirm for Yamaha YSM10?
YSM10 nameplate, HM/HM5 head, feeder bank, nozzle station, multi-camera, tray equipment and board transport. Request the exact nameplate and option list.
03Unit evidence
Does this Yamaha YSM10 illustration prove stock?
The Yamaha YSM10 illustration is model-reference imagery, not a dated stock photograph. Serial, location, condition, price and running evidence require separate confirmation.
Export packing proof
Export Packing and Container Loading
The V3 scrolling proof gallery is retained. It describes LCSMT export preparation, not the condition of a particular Yamaha YSM10 unit.
Send Your Yamaha YSM10 Production Requirement
Share target assembly, process requirements, standard pcb envelope, installed configuration and destination and inspection expectations. LCSMT can review whether an actual Yamaha YSM10 configuration is a practical match.