Home / TRI Equipment / TRI TR7007Q SII
Model guide · unit evidence required
OverviewTRI TR7007Q SII 3D Solder Paste Inspection
The TRI TR7007Q SII combines fringe-projection paste measurement with a new motion-control platform and illumination choices for difficult printed deposits. Use Q SII where the deposit and deformation trial justifies its optics. Do not treat Q SII-S semiconductor variants as the same fitted model.
Manufacturer-published model data
TRI TR7007Q SII Technical Specifications
| Projection | Quad/dual digital fringe projection described by TRI |
|---|---|
| Motion control | EtherCAT controller |
| Illumination | Wide-spectrum lighting; coaxial lighting is optional |
| Warpage | SmartWarp local PCB-deformation compensation |
Manufacturer model data · Important: model-level figures and features are conditional manufacturer information, not guarantees for a particular used TRI TR7007Q SII unit.
Key Features
Configuration Must Be Verified
The offer must identify Projector and light configuration, SmartWarp calibration and software interfaces; Warped panels, reflective deposits, paste-reference comparison and recipe repeatability.
Buyer decision guide
When TRI TR7007Q SII Makes Sense — and When It May Not
TRI TR7007Q SII selection should begin with production requirements and evidence, not with a model name alone.
Application qualification
TRI TR7007Q SII Acceptance Plan
Specify the hard optical surface
For TR7007Q SII, include the pad finish, solder material and the actual deposit shapes. Ask whether coaxial lighting is fitted and show the before/after result on the same difficult region. Avoid selecting an option solely because it appears in a catalogue. Keep raw measurement data so contrast improvements can be separated from threshold changes.
Challenge local deformation
Use a panel with independently observed bow and local support variation. Ask how the paste height reference changes across that panel and review repeated scans near the worst region. TR7007Q SII SmartWarp is a stated measurement capability, not proof that a particular transport fixture or damaged board is suitable for the proposed inspection.
Lock down the exact suffix
Record Q SII on the nameplate, controller information and software screen before ordering. The Q SII-S packaging inspection range must not be inferred from a similar exterior. Confirm CAD import, pad identifiers and the printer feedback handshake. Agree a complete board cycle and an exception log before comparing this system with the SIII platform.
Typical Applications
Typical Applications for TRI TR7007Q SII
TRI TR7007Q SII should be evaluated against the buyer’s measuring paste height, volume and placement on printed pcbs, with local board-deformation compensation and line feedback. The final application fit depends on the evidence for the specific unit.
Before quotation
Three TRI TR7007Q SII Buyer Questions
These questions keep the quotation scope connected to the buyer’s real SMT process.
1
Which projection requirement must the proposed TRI TR7007Q SII demonstrate?
TRI TR7007Q SII buyers should confirm this with actual-machine evidence before quotation.
2
What is included in this TRI TR7007Q SII offer: projector and light configuration, smartwarp calibration and software interfaces?
TRI TR7007Q SII buyers should confirm this with actual-machine evidence before quotation.
3
Can the TRI TR7007Q SII acceptance run document warped panels, reflective deposits, paste-reference comparison and recipe repeatability?
TRI TR7007Q SII buyers should confirm this with actual-machine evidence before quotation.
Running video confirmation
TRI TR7007Q SII Running Video Review
Before shipment, review the relevant power-on, movement, operating state and visible condition for the specific offered unit.
Request an operating sequence of the offered TRI TR7007Q SII. This model-image control requests evidence; it does not play a recorded video.
- Power-on and visible operating-state confirmation
- Measuring paste height, volume and placement on printed PCBs, with local board-deformation compensation and line feedback.
- Unit-specific condition evidence before export packing
Used-machine inspection
Inspection and Export Preparation for an Actual TRI TR7007Q SII
- Nameplate and configurationModel, serial, year, voltage and installed options.
- Machine configurationMechanical, transport, sensing, camera, software and motion condition relevant to the quoted TRI TR7007Q SII.
- Transport and softwareConveyor, sensors, program and line-interface evidence where applicable.
- Running and packing proofPower-on evidence, visible operation and export packing records.
Spare Parts
TRI TR7007Q SII Spare Parts Scope
Request a unit-specific TRI TR7007Q SII list for projector service items, calibration boards, conveyor components, illumination modules and process software. Availability is not claimed on this review page.
Quotation checklist
Provide target assembly, process requirements, projection, installed configuration and destination, required accessories and desired inspection evidence for the proposed TRI TR7007Q SII.
FAQ
Common questions for overseas buyers evaluating a TRI TR7007Q SII.
01Application
Which production task suits TRI TR7007Q SII?
Measuring paste height, volume and placement on printed PCBs, with local board-deformation compensation and line feedback. Use Q SII where the deposit and deformation trial justifies its optics. Do not treat Q SII-S semiconductor variants as the same fitted model.
02Configuration
What should a buyer confirm for TRI TR7007Q SII?
Projector and light configuration, SmartWarp calibration and software interfaces. Request the exact nameplate and option list.
03Unit evidence
Does this TRI TR7007Q SII illustration prove stock?
The TRI TR7007Q SII illustration is model-reference imagery, not a dated stock photograph. Serial, location, condition, price and running evidence require separate confirmation.
Export packing proof
Export Packing and Container Loading
The V3 scrolling proof gallery is retained. It describes LCSMT export preparation, not the condition of a particular TRI TR7007Q SII unit.
Send Your TRI TR7007Q SII Production Requirement
Share target assembly, process requirements, projection, installed configuration and destination and inspection expectations. LCSMT can review whether an actual TRI TR7007Q SII configuration is a practical match.